We have an alto come in through work from time to time. I've only had a cursory glance at the physical size of the engine, but it's quite a bit smaller than the current swift engine. Even though the M10 is supposedly a "new" engine, it looks eerily similar to the G10... Best of all, it'll ...

Throwing the GTi hubs into the mix adds a few problems with steering geometry. It can be solved, but it just turns a 2 hour job into a 10 hour one.

I've added a MSD 6A to one of my earlier cars, still retained the points though. In this, the points don't have to handle the current that they normally would, so they last a helluva lot longer. The 6A gives you a much better spark, ended issues with plugs oiling & rich-fouling. Considered mucki...

Huh I what? :P Just try to get a replacement. Much cheaper option. THEN if you don't have any luck, I'll ask around & see how much moolah a resleeved block & a rebuild set is going to set you back. Might be the better option to build it, as you'll get a good base to start from & not be g...

If they're anything like the chinese knockoffs of Honda motorbikes, they're likely to be total shite.

Someone has a sense of humour - not. A reply to my email that I sent. re: mightyboy, hi adam, ok heres the list on the mightyboy,aftermarket 6.6 ltr v10 engine was installed last year,4 barrell high flow carbie with a 16 psi boosted turbo, putting out 950 on the dyno,full saas interior,1200 amped st...

I had my suspicions it was sold on to someone who wouldn't appreciate it... The wife said she saw it before we left newcastle & said then it was looking pretty scratched up

Steve, you need to get your priorities sorted mate.
I'll have pics of the wife

How bad/incomplete is the parts car?

The response curve on the F5a is a little more aggressive from memory, may cause engine pinging under load depending on temperature, fuel type etc. F5a uses Denso 33100-78319 dizzy (or model 029100-6750). F8b uses Denso 33100-78410 dizzy (or model 029100-7270). Sorry for the late reply, don't get mu...

Anyone know of it's whereabouts? Just wondering what happened to my old MB after the guy I sold it to sold it on.

Last seen in Stockland Kotara, in Newcastle.

http://www.tamon.org/gallery/v/events/T ... 0.jpg.html

Yes... They're addictive. I'm considering getting another one & taking my time with it. Must have a reasonable body, reasonable interior (no fake fur if possible :sick: ) Mechanicals negotiable, (auto preferred, but manual acceptable if I can find an auto subframe for it). A couple of weeks rego...

How much extra do you want for complying & regoing them?

Does the MB have air?

Anybody?

I'm moving out at the end of the week so $20 gets 'em. I might be able to drop them off on my way through, if anyone is up the hunter valley, scone/quirindi/gunnedah/narrabri area...

I've got a pair of Hancook 155R12C light truck tyres i'd like to get rid of. 8 months old & 95+% tread, we've just scrapped the car they came off so no longer need them. Surely someone somewhere wants to keep stock 12" wheels? They were $90-something each plus fitting when we got them, open...

What's it's ETA?

What's it need to comply for australia? Can you arrange?

Cost?

How much deposit?