many thanks. able to locate.

please post the picture for vacuum port where i can hook up vacuum gauge for carb adjustments (idle + mixture)


engine is f8b. mikuni carb - factory.


thanks!!

thanks alot gadj

Thank you guys, you guys are the best (Y) (Y) (Y). I found out the leak, it was the gasket/seal for mechanical thermostat, which was leaking, when i opened up, the seal was to none. After replacing it, water stays where it suppose too plus i forgot to bleed the system when i changed the seal. car is...

I am loosing water from the coolant reservoir after driving every 120 km, there were traces of coolant on the battery terminals as well as the bonet itself, I have checked the gasket, it was all ok infact i get it checked from various people and they all were positive about it. There were no oil tra...

found the problem, it was the slow speed fuel port, it was filled with dirt, the guy took out the carburetor cleaner and remove the idle fuel port out and clean it with a thin wire and put ample amount of carburetor cleaner, thick black smoke came out and then it went perfect, now when i convert my ...

guys finally, able to set the timing well and perfect plus the i did first rotate the engine to TDC, align the mark and then starts the engine and adjust the timing it did great, however i like to know if i don't move the engine by hand and don't align the mark visually what would happen ? today i i...

@Tez thanks, that would be great, i will do it the same way, by putting the screw driver and see the top, and feel the line if its there or not, @djflex thankyou i will follow the 2nd line next time, 10 degree would be fine i guess, the thing is we here run cars on two type of fuels one on gas and p...

perfectly written, questions 1) I have suzuki Mehran ( alto) SB-308, there are two marks that have no color on it plus there are quite near to each other, i wanted to know how do i set the timing part accurately and which of the marks to follow, 2) i have also seen 3 different color codes red blue a...

thankyou, i just wanted to confirm it

just in case if i remove the distributor out, the gear shaft undernearth needs an adjustment or i can fix it in any direction.

thankyou, I am trying to adjust the distributor and the timing with the help of the timing gun however i wanted to know if there is any manual which can help me adjusting the timing and the distributor because once there was a mechanic who removed the distributor and since then i feel my car is very...

anybody has the scanned copy for sb308 please share, 1 more thing does f8b and sb308 are similar in terms of parts,maintainence etc ?