Do U still have the alto dash?

Hi Is the Dash guage cluster still for sale?

There is a MB on eBay at the moment in Cairns for Buy it now for $1 missing door, no photo tho

SPECIFICATIONS
Cylinders 3 Bore 67mm Stroke 68mm Displacement .719 Liter
Output HP 8.4 @ 1800 RPM, 10.3 @ 2200RPM, 12.1 @ 2600 RPM, 13.8 @ 3000RPM, 16.3 @ 3600 RPM
Weight 80 kg approx.

So it turns out we have a Tiny 3cyl Diesel Kubota engine in a little boring machine at work. Its a D 722-E and it 'looks' like a perfect engine to be transplanted into a MB. Its roughly 380mm from the front of fan to back of block, 565mm from sump plug to top of thermostat housing, about 400mm wide ...

Nice 1!!

Ill Have a look when I get home at why I can't do this, but I was just wondering if there was enough meat (steel) in the front hubs and rear drums to knock the wheel studs out and just drill them out to suit bigger wheel studs? as the regular size studs and nuts are cheap as chips and they would be ...

That would be awesome, Id get a set

Hi Are the wheels for sale doe it have a sports dash also?
Thanx Dan

Ill put in an order for the conversion mounts if You can get a few of them fabbed up. What are U doing about the top mount? Are You getting a blue plate/engineering cert to make it legal? If so are the std brakes /suspension exc.. Ok as they are? That sump looks very Very! Close to the sub frame. Wo...

Im chasing a 1.0L 3cyl G10(A?) Swift so I can rob engine/gbox for a conversion to a MB
Whole car or front cut would be nice
Thanx Dan

Im chasing a G10(A)engine I was wondering what engine the Altos had, there is a couple of cheap ones on Gumtree at the moment they are 1996/97 models.
It says in the engine info that they are the 1L but a 4 cylinder.... 3 cylinder 1L is what I after.
Thanx Dan

Yep That's after a shoe adjustment, and those little triangle adjusters are for cars with bare cable not fully enclosed ones like on MBs

I have just put new rear shoes in the Mb and even with the handbrake adjusted up as far as it would go it only just works, so I guess it is just old and stretched where would I get another cable? (or how do I get a bit more out of the old one?)
Thanx Dan

This would go like stink!!
Up Brizzy way
No mod plate mentioned...
http://www.boostclassifieds.com.au/car- ... -Sale.html