F8B engines are getting hard to source 2nd hand - particularly blocks - and the only way to get a new engine is a Chinese reproduction through Alibaba.

From what I've seen the F10A is not a direct fit, but something that anyone with a degree of backyard mechanical skill could handle. The engine and gearbox are physically longer, requiring a custom driveshaft. The SK410 gearbox is cable shift as opposed to the ST90 linkage rod setup, so that will ne...

Sorry mate, I've only got a few loose (spare) nuts. Not enough for a full set. I'll be chasing up my supplier for another order soon.
I do have a set of oversize uncoated steel nuts if they're any good to you.

Hmm. I might have a set left. Will check and get back to you.

It's cool if you want to share it from YT, but as a general rule I don't permit my videos to be reproduced or distributed.

If you've got the cluster shroud removed and the screws out of the front of the cluster then it should pull out towards you. The speedo cable will resist, but pops off with enough force. Then it's just the electrical connector. There might be a separate blade connector for the earth that has dropped...

Pretty sure that the fuel/temp gauges have a separate earth. Break out the multimeter.

Yes, the distributor also has to come off. It's an unnecessarily complicated design.
Parts are easy enough to get through Megazip, RHD and other resellers.

5.5" wide with +40mm offset, max 165 wide tyre.

Standard hood liner is foam-backed vinyl glued to the sheet metal. Because I'm lazy I replaced mine with speaker box carpet, glued on with contact adhesive. Does the job.

About the same performance either way if both are running the same boost. The RHB31 spools really quickly, so is not much different to a supercharger in terms of power/torque delivery.

Yep. There's been a few. AMR 300 is the most common choice.

That's a bit further to the left on the diagram. 'Illumination light' is the little bulb behind the fan controls that comes on with the cluster lights.

Damn I love that rig. Such an impressive setup you've built Cam.

You're looking for the wire that powers the lights in the instrument cluster?
Wiring diagram says Red w/ Yellow Trace - http://www.teammightyboy.com/images/wor ... wiring.pdf