haha ive seen someone on here with the same size wheels, but i think its standard height. theyd stick out a bit :O

Selling my old wheels, Original Simmons 15x7 +25 4x114.3 with centre caps.
All 4 rims have some minor gutter rash on them. They are polished, not painted but could do with another polish.

Looking for offers around $1000, located in Sunbury VIC

Ive got a Manaul gearbox leftover from a spare F8B engine i removed from and old alto. I drove this around before removing so i know the gearbox works fine.

looking for $200, located in Sunbury, VIC.

i removed my spare tyre and all the brackets years ago, so ive got plenty of room under there. the rear axle will be camber adjustable to

ive still got a few brand new badges from suzuki, $55 posted. dont have any 2nd hand ones though sorry!

they are 504 lbs/in, so pretty stiff but they work well. the camber tops yeah, cut atleast half the material off and re-drilled/pressed the studs in.

still tossing up what to do in the rear, but will probably remove the leaf springs etc and make my own adjustable 4-link type rear end

everything needs to be modified. the ones i used are for a 02-07 WRX 04 GDB, but that really means nothing as these are in no way a bolt in item. i only got these particular struts as they were very cheap, and i needed something alot stiffer than anything bolt-in. $400 and a days work is pretty damn...

the front i didnt cut, just alot of hammer/dolly work. the rear pretty much the same, but i also had to detatch the inner guard and re-attach it once i hammered it out. the tyres are 165x45x15. heres a better pic now with my coilovers in, just gotta sort out the rear now :D WP_20150403_002.jpg WP_20...

it actually drives fine, but ill get back to you on that after i put some modified wrx coilovers in the front this weekend.

15x8 +25. if your wanting to do something similar, your in for alot of metalwork. but then again, i like my cars low

dunno whats going on with the quality of these photo's, ill take some better ones soon. and as a comparison the bottom photos are with standard wheels/tyres.

dont bother with a cheap electric pump, you can still get replacement fuel pumps for a decent price!

i used a manual subframe in my auto MB when i repaired it, only mod i had to do was drill a new hole for the gearbox mount further forward approx 25mm

hey Tez welcome back

im not 100% but if the suzi motors are anything like the other motors ive dealt with, if you use the auto motor and put a manual behind it, the crank seal will most likely be different, make sure you use the manual one!


are you going to rebuilt it or put it in as-is?

sold**

selling one of my spare F8B's, car i removed it from had 190,000k's. despite its poor looks this engine ran like a dream, i drove it around the block a few times before removing it. comes with all bolt-ons, manual gearbox not included (another forum member has dibs on that) engine located in sunbury...