Try SuziStore, or maybe avail through Clark Rubber??

Seats!
viewtopic.php?f=1&t=6578

They look and feel great.. So far! ;) Better than my 5yo work car.. Didnt use the L-steel approach, although I do agree some extra bracing between the two spots would be great. I wanted to keep the stock rails unmodified, and using the standard bolt holes (cos mine are in good condition) on the floo...

only hiccup was needing to run the tap through one of the seat mounting insert cos it had glue/crap through it. no biggy.

I went and got the seats and the pre-drilled bars to suit. some precise drilling and use of spacers was nessesary as the place to drill to match the stock rails was very close to the bolts to secure the bars to the seats. otherwise, the only modification to any stock part of the vehicle was to enlar...

So I got distracted a bit the last two weeks. Now have a Cert4 Project Managemen. Yay, go me! also have put new seats inso I dont fall off them when cornering, or screw my back (again). as per this thread http://www.teammightyboy.com/forum/viewtopic.php?f=1&t=6578 I went and got the seats and th...

Good luck!

Very interested to know how you go about/engineer advised reinforcing the chassis, etc.

I used to have a BMW, for some reason their seats all are major risks to back injury, when getting in and out. Think my natural method of lowering myself into seats should help avoid the side bolsters! To clarify, those rails are now further/wider than the std 375mm spacing? In order to match the se...

Awesome, those are the same type I was looking at yesterday I think.
Took seat out last night, the mounts from seat to rail across are 375mm apart, it that bar to widen rails gap to suit or opposite?
Also, are they squashed between the two seats or barely touching?

I messed it up then. Must have crossed circuit somewhere.

Trying to hook the lights back in, but having some issues. I have the wiring diagram, so will chase down the right wires to patch in. However, what lights should be on at various times? Ie When park lights on, white light from bumper parkers. When low beam on, parkers should be on still. Indicators ...

I'll check when I get home, but think 12 months was about $350ish

Seat base looked to have threaded inserts to take the bolts, or is it threaded holes in the frame/base?

I hear you about Sparcos. Just being a bit more realistic at this stage.

Repco suck big hair ones.

No stock in WA, probably never was!

So went down the road to local owned chain, not the same model, but they have the SP66 for just a bit more.
Will get stock rails out and go looking anyway. Sitting in the chair it didnt feel like too much, unlike Hewball's Bride seats..

Chad_ wrote: the bolts that hold them are almost the same width spacing as the rails.

Sorry, you mean the seats bolt spacing doesnt line up with the stock rails?

Only ever fitted stock for stock as far as seats go before.
Might see if I can take a set of stock rails in store with me to have a look.