New F8b Carbys EOI

Need to offload some Suzuki parts? Do it here.
Post Reply
User avatar
Husky
Posts: 502
Joined: Tue Jan 05, 2010 8:59 pm
Location: Sydney, NSW

Gday Guys,
In order to keep our beautiful Mighty boys running I am wanting to attain new parts.
For sometime now I have been looking at importing F8b parts form China. I have found a supplier who is happy to do small orders.
For the future I will be looking into full motors and gearboxs but for now I am going to start with carbys.

Carby kits are great but they dont fix worn parts,blocked jets and worn butterflies.

For a BRAND NEW f8b carby the price will be approx $220 depending on numbers and USD vs AUD to your door. Most of the price is in Transit costs.
For people who are genuine please private message me so I can get final numbers for order.
I will then get final exact price and ask for a deposit before I make the final order.
I would like to get orders finalised in the next couple of weeks
Cheers :)
Attachments
Mikuni.JPG
Mikuni f8b.JPG
Mikuni f8b .1.JPG
Top
User avatar
RetroHatch
Posts: 76
Joined: Fri May 04, 2012 8:06 pm
Location: Cessnock, NSW

Will this carb fit and work on the F5A?
Tailgating my Hatch doesnt increase the horsepower of the F5A
Top
User avatar
Brayden
Posts: 9101
Joined: Sun Apr 11, 2004 3:09 am
Location: Canberra ACT
Contact:
Contact Brayden

Yes, but you might want to swap the F5A jets into it.
F8B EFI turbo - Three pots and a snail.
Top
User avatar
Husky
Posts: 502
Joined: Tue Jan 05, 2010 8:59 pm
Location: Sydney, NSW

Gday guys,
I have had alot of interest, not surprising really for a brand new carby. Guys have been telling me they have paid more or got quoted more for a second hand one to get a full rebuild/service at a carby specialist.
I would like to finalise orders in the next week. Its not fair for the guys who want to get there carbys to wait too long.
People who want them please PM me by COB friday 1st June.
I will then caculate exact price and PM people for payment and make the order.
Cheers :wink:
Top
User avatar
Husky
Posts: 502
Joined: Tue Jan 05, 2010 8:59 pm
Location: Sydney, NSW

Ok so final orders need to be in By tomorrow COB. Thanks for your patients to the people who have shown interest. I will then PM payment details and as soon as payment is recieved I will make the order.
Cheers :)
Top
User avatar
RetroHatch
Posts: 76
Joined: Fri May 04, 2012 8:06 pm
Location: Cessnock, NSW

Just a shout out to Husky for the great help and prompt delivery of my new carby.
I took delivery of it abot 2-3 weeks ago, finally got round to fitting it with the help of Chad last night.

Now the carb is built for the F8A but I have put it on my F5A. I tossed up the idea to whether I should swap the jets out, but decided to bolt it on and see what happens. Have driven it for about 150km's and no dramas. I have alittle more throttle response and but nothing real impressive as it didnt have any to begin with :lol:

Other than a extra vaccum port the carb was pretty much the same as the F5A. Was well packaged too. Husky threw me some extra jets so thumbs up to him :thumbup1:
IMG_0193.jpg
IMG_0193.jpg (50.16 KiB) Viewed 1783 times
IMG_0192.jpg
IMG_0192.jpg (46.67 KiB) Viewed 1783 times
This photo is just a mock up/dream time :lol: :lol: if only
IMG_0191.jpg
IMG_0191.jpg (42.9 KiB) Viewed 1783 times
Tailgating my Hatch doesnt increase the horsepower of the F5A
Top
User avatar
Husky
Posts: 502
Joined: Tue Jan 05, 2010 8:59 pm
Location: Sydney, NSW

Cheers RetroHatch,
Glad you are happy with the results. Its great we can see another little beast on the road. If anyone else would like a F8b carby shoot me a pm and we can go from there. :thumbup1:
Top
Post Reply

Return to “For Sale”