F6A MAP sensor

Suzuki Cappuccino tech question and answers.
Post Reply
edm418
Posts: 71
Joined: Wed Mar 30, 2011 2:00 pm

Hi all, I need a MAP sensor if anyone has one for sale please let me know...

Also, does anyone have a clear photo of one in situ?

thanks :)


p.s. would a MAP sensor from another car be suitable?
User avatar
djflex
Posts: 166
Joined: Tue Oct 18, 2005 6:45 pm
Location: Gold Coast

which motor F6A Sohc/Dohc, turbo or asperated?

Ill do some searching
Image
"When there is no more room in hell, the dead will walk the earth"
George A Romero - Father of Zombie Films
edm418
Posts: 71
Joined: Wed Mar 30, 2011 2:00 pm

Hey its a DOHC turbo from an ea11r... thats all I know!

but if you need more info, let me know and I'll see what I can dig up...

thanks for the help so far anyway :)

e
User avatar
djflex
Posts: 166
Joined: Tue Oct 18, 2005 6:45 pm
Location: Gold Coast

cheers,

I'll track one down for you and also take a photo of mine (sohc) im certain they will be the same

Here a short video explaining how it works

http://www.youtube.com/watch?v=gvAoNgUXR_U
Image
"When there is no more room in hell, the dead will walk the earth"
George A Romero - Father of Zombie Films
edm418
Posts: 71
Joined: Wed Mar 30, 2011 2:00 pm

Hey thanks for the vid :)

I was just quoted $460nzd for a new MAP sensor ex japan by Suzuki NZ.

I'd have to sell the car to pay for that!
grant4561
Posts: 183
Joined: Fri Aug 08, 2008 12:21 pm
Location: Maroochydore. QLD

I probably have a couple from cappo's lieing around.
I will check today and let you know.
edm418
Posts: 71
Joined: Wed Mar 30, 2011 2:00 pm

Hey Grant, that would be fantastic! thanks heaps :)

e.
User avatar
djflex
Posts: 166
Joined: Tue Oct 18, 2005 6:45 pm
Location: Gold Coast

here a guide on cleaning them

http://www.4wdaction.com.au/forum/viewt ... 18&t=94279

there is a picture included as well

I spoke to a chap on ebay who is wrecking a f6a dohc, if you can provide a pic he should have one as well


Here is photos of my Manifold and all the sensors i could find
IMG_2008.JPG
IMG_2008.JPG (57.08 KiB) Viewed 7167 times
IMG_2009.JPG
IMG_2009.JPG (67.18 KiB) Viewed 7167 times
IMG_2010.JPG
IMG_2010.JPG (57.04 KiB) Viewed 7167 times
Im guessing (could be wrong) that this is most likely the MAP sensor
Im guessing (could be wrong) that this is most likely the MAP sensor
IMG_2011.JPG (62.66 KiB) Viewed 7167 times
The manifold absolute pressure sensor (MAP sensor) is one of the sensors used in an internal combustion engine's electronic control system.

Engines that use a MAP sensor are typically fuel injected. The manifold absolute pressure sensor provides instantaneous manifold pressure information to the engine's electronic control unit (ECU). The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion (see stoichiometry) and influence the advance or retard of ignition timing. A fuel-injected engine may alternately use a mass airflow sensor (MAF sensor) to detect the intake airflow. A typical configuration employs one or the other, but seldom both.

MAP sensor data can be converted to air mass data using the speed-density method. Engine speed (RPM) and air temperature are also necessary to complete the speed-density calculation. The MAP sensor can also be used in OBD II (on-board diagnostics) applications to test the EGR (exhaust gas recirculation) valve for functionality, an application typical in OBD II equipped General Motors engines.
Image
"When there is no more room in hell, the dead will walk the earth"
George A Romero - Father of Zombie Films
edm418
Posts: 71
Joined: Wed Mar 30, 2011 2:00 pm

HI thanks for the photos and info, I didn't realise they could get clogged up like that!

this is the location of the MAP sensor on the cappa. It's not on the block which will be why it didn't come with the engine when I bought it...

edit> MAP sensor part no. 1859-64D00
MAP sensor location.png
grant4561
Posts: 183
Joined: Fri Aug 08, 2008 12:21 pm
Location: Maroochydore. QLD

The pics above are of the IAC or BOV controller.
The MAP sensor is mounted on the firewall at thge rear of the intake manifild in a cappo.
I will check today but am pretty sure I have a couple.
User avatar
djflex
Posts: 166
Joined: Tue Oct 18, 2005 6:45 pm
Location: Gold Coast

Found the MAP sensor on my F6A sohc it looks like this

part number on sohc is #18590-64d00
IMG_2013.JPG
IMG_2012.JPG
Image
"When there is no more room in hell, the dead will walk the earth"
George A Romero - Father of Zombie Films
grant4561
Posts: 183
Joined: Fri Aug 08, 2008 12:21 pm
Location: Maroochydore. QLD

Heres a pic of the MAP sensor mounted on the firewall behind the manifold.
It's vacuum line is connected to the brown plastic fitting on the rear left of the manifold. The fitting has a second connection which is blanked off and usualy only used to check vacuum/boost when servicing.

edm418

I have one and will send you a PM now.
Attachments
20130817_105429_resized_1.jpg
Post Reply