FS: 15 x 5.5 mags
- hatch4play
- Posts: 234
- Joined: Fri Mar 03, 2006 3:44 pm
you will need lug nuts made up to fit that rim onto a boy or hatch. or 12mm stud conversion.
[url=http://tamon.edave.net/gallery/v/members/hatch4play/]View My Gallery![/url]
Injected F8B Hatch!
Soon To Be Turbo!
Injected F8B Hatch!
Soon To Be Turbo!
Don't forget the guard rolling and rear bump stop shaving.
F8B EFI turbo - Three pots and a snail.
With regard to the Mags rims I have, they are something like 36 or 38 offset??? (on a 6" rim) This is generally OK except if I hit a big bump turning sharply (like going up a drive quick). I've trimmed/rolled back and front gaurds. At the rears when the back is fully down (eg full load of sand), there is all of 2mm between the tyres and the gaurds That means when cornering with a full load there is some scuffing. I also ordered special mag nuts for the 10 studs (rear only before just recently).
I am in the process of giving the boy a minor makeover and in all likelyhood will be swapping the mags for powdercoated steelies which are 5.5 with a 46 offset. Should be a lot more practical.
I am in the process of giving the boy a minor makeover and in all likelyhood will be swapping the mags for powdercoated steelies which are 5.5 with a 46 offset. Should be a lot more practical.