might be keen to get rid of it so this is it...
car
1985 suzuki mighty boy (unleaded)
543cc
4 speed
originally black but mostly primer at the moment
140000kms
rego till feb 2005 but might put 12 mths on
starts 1st go drives great
body work
shaved side indicators
shaved door handles and locks(remote central locking plus small button for opening duties)
shaved body lines (upper and lower and the 2 on the b piller)
shaved aerial
shaved fuel flap (relocated into tub)
welded up holes where torno? was and roof racks
suspension
reset rear leafs 5 inches..rubber bump stops still in place but removed hangy down bits from chassis rails
front lowered on pedders springs
still has plenty of travel and ground clearance just looks cool cause its tuckin 12s
interior
custom door trims with 6 in speakers in fiberglass pods and embossed flames in black vinyl
cd player in glove box with very neat surround (factory stereo still in place for looks)
2 12in subs in fluffy black box behind seats+ 4 ch amp
2 layers of 5% tint (pretty dark but can still see out of)
everything else standard
so thats bout it, just seening if any1 out there would be keen. im on the central coast nsw and if any 1 want to put down a ball park figure go for it
cheers
matt 0405497919
EOI: Mighty Boy
Sounds very interesting mate.
I like the idea of relocating the fuel filler to the tray. Was considering doing that myself nut alas it was too much hard work for me.
Would love to see how it looks lowered 5"'s
Not particularly happy with mine at the usual 2" drop - Although I'm sure I've got less than 3"s from the axle to the bump stop stopper (without the bump stop on the axle)
As for price, that would very much depend on the quality of the work. If all the indicators etc are filled by welding over I'd say you'd be able to ask a bit for it.
Good luck mate. - Feel free to drop a pic hey.
I like the idea of relocating the fuel filler to the tray. Was considering doing that myself nut alas it was too much hard work for me.
Would love to see how it looks lowered 5"'s
Not particularly happy with mine at the usual 2" drop - Although I'm sure I've got less than 3"s from the axle to the bump stop stopper (without the bump stop on the axle)
As for price, that would very much depend on the quality of the work. If all the indicators etc are filled by welding over I'd say you'd be able to ask a bit for it.
Good luck mate. - Feel free to drop a pic hey.
I've done some measurements, and if the rear was lowered 5" then the wheels would be practially sitting on the inside of the wheel arch, not to mention that the shocks only have just over 3" travel in them.
Mate have you got any pics? I'm keen to see what this thing looks like! It may also help to get you an offer. ( Maybe from me! )
Email to admin@tamon.org if you've got em. Cheers!
Mate have you got any pics? I'm keen to see what this thing looks like! It may also help to get you an offer. ( Maybe from me! )
Email to admin@tamon.org if you've got em. Cheers!
F8B EFI turbo - Three pots and a snail.
sending some pics to that email shortly..
bout the springs..i had them reset 4in..so they where basically flat, then put them in and bump stops where touching so i cut out the metal part hanging down from the chassis...
bout the body work...indicaters, locks, handles,fuel flap, aerial and any other hole have been welded up...the body lines etc have been filled with fibreglass bog then then normal bog..
still needs a good rubbing back, and there is still a few spots of rust but any 1 who can use there hands can sort it out
without stereo and with only 2 mths rego left i dont want big dollars just want to know what someone would pay
cheers
matt
bout the springs..i had them reset 4in..so they where basically flat, then put them in and bump stops where touching so i cut out the metal part hanging down from the chassis...
bout the body work...indicaters, locks, handles,fuel flap, aerial and any other hole have been welded up...the body lines etc have been filled with fibreglass bog then then normal bog..
still needs a good rubbing back, and there is still a few spots of rust but any 1 who can use there hands can sort it out
without stereo and with only 2 mths rego left i dont want big dollars just want to know what someone would pay
cheers
matt
There was only one attached to the email mate. Here it is:
F8B EFI turbo - Three pots and a snail.
Added a gallery for doom's pics
http://tamon.org/gallery/Matt
Mate, what sort of ballpark figure are you looking at selling for?
http://tamon.org/gallery/Matt
Mate, what sort of ballpark figure are you looking at selling for?
F8B EFI turbo - Three pots and a snail.