Hi all, I have just picked up a 1986 mighty boy in pretty good condition but it had been sitting for a while. First of all no fuel so after fixing the fuel pump then it was too much fuel. I pulled the carby apart and found the the float had broken up and as such the engine was flooding. Just wondering where I would start looking for a new float?? Wreckers are very light on up here in Townsville and a search of the internet hasn't brought anything up other than rebuild kits.
The engine is the f5a and the carby is a Mikuni twin barrel. Any help would be appreciated. I have attached a couple photos of the beast as well.
Cheers
Paul
Now the MB Build thread
-
- Posts: 199
- Joined: Mon May 05, 2008 7:18 pm
- Location: Gympie, Queensland
- Contact:
Hi,
I'm pretty sure there is an old suzuki alto sitting out at the wreckers with a complete F5A in it, if i get time tomorrow i can go check it out and what he wants for it if that helps??
Also depending on time as i'm heading away for work shortly, i can have it rebuilt for you as well.
Cheers,
Al
I'm pretty sure there is an old suzuki alto sitting out at the wreckers with a complete F5A in it, if i get time tomorrow i can go check it out and what he wants for it if that helps??
Also depending on time as i'm heading away for work shortly, i can have it rebuilt for you as well.
Cheers,
Al
Drive: 1997 Toyota Starlet... (the incognito mobile)
1985 Suzuki Mighty Boy, currently being restored.
1995 Nissan GT-R33
Why doesn't the Gene Pool have life gaurds??
1985 Suzuki Mighty Boy, currently being restored.
1995 Nissan GT-R33
Why doesn't the Gene Pool have life gaurds??
- stevan_istheman
- Posts: 851
- Joined: Tue Nov 02, 2004 10:13 am
- Location: Sunshine Coast, Queensland
- Contact:
Very neat unit... and it has a dash mat!!
Unfortunately i don't have a spare carbie to help you out. good luck!
Unfortunately i don't have a spare carbie to help you out. good luck!
BAL4 Designs
For all your mechanical design and drafting requirements.
For all your mechanical design and drafting requirements.
Al, that would be great if you could ask, I dont need a rebuild as the carby that I have looks like it has recently been done. If you want PM me some bank details I can pop some money into you account today to cover the cost of purchase and postage.
Cheers
Paul
Cheers
Paul
Got a dud F5a carbie here, I'll have a look see if the float is worth mailing to you once I find it - might need a couple of days. If I don't PM you by Monday night, remind me.
If the float is okay it's yours for cost of postage.
If the float is okay it's yours for cost of postage.
So many delays to getting my MB back in order with 993cc & 5 speed transaxle... neighbor issue gone, donor shell up on rotisserie, new sheds on the way.... another project also..
A good carby rebuilding joint should be able to supply a new float for you. I picked up a new one when i rebuilt my F8b carby from a place near highpoint, i think it's called highpoint carbies & efi. They are down here in Vic tho.
BTW, very tidy looking mighty boy! Nice score.
Cheers
ToranaGuy
BTW, very tidy looking mighty boy! Nice score.
Cheers
ToranaGuy
It's update time MB Parts list! send part info to toranaguy74@optusnet.com.au|
You are right about a new float being avail there T.G. A second hand unit has been supplied at postage cost.
So many delays to getting my MB back in order with 993cc & 5 speed transaxle... neighbor issue gone, donor shell up on rotisserie, new sheds on the way.... another project also..
Not if you drive in a straight line on a road with no bumps!
F8B EFI turbo - Three pots and a snail.