Hatch Front Springs

[azzas15]

Hi Guys,

Hopefully one of you experienced fellas might be able to help with my problem..

Seems I got a bit excited while playing with the suspension and cut before i realized my springs are slightly con caved. anys ways to cut a long story short i cut the springs and they wont fit in the top housing. After a trip to the U pull it i found that there are no hatchs in sight. Can anyone let me know what springs will fit?

Many Thanks

Aaron

[Billie]

Sa swift struts will go in with mb strut top and will lower it and inch or so.

[azzas15]

Hi Billy,

Thanks for responding. Do the mighty boy and the hatch have the same front end? for suspension ect?

[Billie]

Yep i know the disc brake front end hatches do. Not sure if you have drum brake front end.

[azzas15]

Hi Billy,

I have front disk brakes on the front, Finally somthing goes my way!

Cheers mate.

Aaron

[Brayden]

If you just need springs then you could use the opportunity to fit king springs in either standard height or lowered. That way you don't have 30 year old saggy springs at the pointy end.

[azzas15]

hi brayden,

what sort of money would i be looking at?

[Brayden]

About $200 for the pair, $100 or less second hand.

[azzas15]

Ohh for some reason I thought they would be alot more I'm buyin parts for my 4x4 and everything is expensive.. Sorry to ask so many questions but where abouts can I obtain these springs?

[Brayden]

You can get them anywhere that sells King Springs - any auto parts store and even ebay. What you're looking for is springs for a 1986-88 SA413 Swift GTi. From memory the standard height are KSFS12 and lowered are KSFL12, but double check that before you order.

[Tez]

Alternatively...
http://www.teammightyboy.com/forum/view ... =16&t=5627

[azzas15]

Thanks Mate,

I posted somthing on there.

But im still interested in the Kings..

But im moving in a few weeks so the hatch needs to be moving lol.

Aaron