Hope someone can help me. Since I have installed the twinkie from the alto works (CC72V) I always had a plug, coming from something I don't even know what it is, disconnected. The loom is the original from the alto, but there is no correspondednt plu close by.
Thanks,
Paride
Could anyone with a similar setup shed some light? Been disconnected, does it make much difference??F5A DOHC wiring help
If the unit that the plug is coming from has vacuum lines then it will be an idle air adjuster, either for A/C or electrical load.
F8B EFI turbo - Three pots and a snail.
Thanks Brayden,
Yes it has a vacuum line coming from the bottom. If it is an idle adjuster, well, I don't need it as it idles fine under every circumstance.
I will try then to disconnect it and plug the vacuum line .
Yes it has a vacuum line coming from the bottom. If it is an idle adjuster, well, I don't need it as it idles fine under every circumstance.
I will try then to disconnect it and plug the vacuum line .
[img]http://www.tamon.org/gallery/d/11796-1/holk3-1.jpg[/img]