F8b Exhaust manifold preEGR

[ToranaGuy]

Hey everyone,

I'm in need of a pre-EGR exhaust manifold for my F8b. Either that or a set of extractors for the moment(going down the turbo road later). Does anyone have a manifold that I can buy?

It must not have the EGR fitting on it.

I'm in Wyndham Vale, but will travel around Melb, Geelong & so on area's to get the manifold I need.

Cheers

ToranaGuy

[ToranaGuy]

Bump - still very much in need, or hell, even a F8b EGR carby manifold, not fussed if it's auto or manual, but it can't be cracked at all lol.

Cheers

ToranaGuy

[nelpd96]

Not too sure what the issue is but it sounds like you have an egr exhaust and a not egr inlet and are trying to match the two up. If so i have a blanked off egr bung here from that g10a that might fit.

Cheers Paul

[Husky]

Am I understanding all you would need is a threading bung to go in the exhaust manifold to sort the problem? If so I may be able to help

[Brayden]

Threaded bung? I bought a bolt for mine and screwed it in, cut off the head and tack welded it in place.

[ToranaGuy]

Hey guys, thanks for the replies.

I require one of the following...

A NON EGR type exhaust manifold - ie no EGR hole.

OR a Bung/bolt to block it off. I don't want to weld the hole up. If anyone knows the size of the thread I could probably get a bung/bolt to plug it up.

Trouble is I think the EGR intake I have is cracked, and don't have another to just simply swap over. To change to non EGR I need to remove the EGR or block it off on the exhaust manifold too.

Cheers

ToranaGuy

[ToranaGuy]

Anyone know the thread profile so I can get a bung & plug my manifold?

Cheers

ToranaGuy