WTB F8B Auto

For all your Suzuki wants and needs
User avatar
rf4burns
Posts: 162
Joined: Fri Sep 03, 2010 7:26 pm
Location: Central QLD

Yup need an F8B Auto & computer (the thingy under the driver's seat)or the boy will be scraped as there is only so much driving you can do in low :( PM me with price if you have one .
Last edited by rf4burns on Thu Apr 02, 2015 6:12 am, edited 2 times in total.
Get with it ,Get over it ,Get on with it .....OR LEAVE
ssc87
Posts: 97
Joined: Wed Aug 12, 2009 11:34 pm
Location: Newy

I should have one here, will have a look.
User avatar
Brayden
Posts: 9101
Joined: Sun Apr 11, 2004 3:09 am
Location: Canberra ACT
Contact:

FYI: the same problem can also be caused by a fault with:
- Shifter solenoid
- Speedo sensor
- Vacuum sensor
F8B EFI turbo - Three pots and a snail.
User avatar
rf4burns
Posts: 162
Joined: Fri Sep 03, 2010 7:26 pm
Location: Central QLD

Thanks SSC87 let me know ;Brayden the speedo sensor/shift solonoid/vacuum sensor checks ok (in drive analog meter across terminal 1 and 7 selector in D spin wheel ign on pulsing ok; shift solonoid measures 10 ohm and can hear solonoid enguage when powered; vac sensor tested contact/no contact no run/run) but if you have anything else to try let me know ...will try to measure the pressure when I get a chance and if I can find where :( .
Get with it ,Get over it ,Get on with it .....OR LEAVE
User avatar
rf4burns
Posts: 162
Joined: Fri Sep 03, 2010 7:26 pm
Location: Central QLD

I have changesd the transmission that was in it to one from a mightyboy this has fixed the no second change problem :-) but would like an F8B auto (different final drive ratio)so if anyone has one let me know -even if it needs work - maybe able to one out of two.
Get with it ,Get over it ,Get on with it .....OR LEAVE
User avatar
rf4burns
Posts: 162
Joined: Fri Sep 03, 2010 7:26 pm
Location: Central QLD

Still looking for an F8B auto
Get with it ,Get over it ,Get on with it .....OR LEAVE
User avatar
rf4burns
Posts: 162
Joined: Fri Sep 03, 2010 7:26 pm
Location: Central QLD

Yup Still looking for one of these :-(
Get with it ,Get over it ,Get on with it .....OR LEAVE
User avatar
rf4burns
Posts: 162
Joined: Fri Sep 03, 2010 7:26 pm
Location: Central QLD

Still after one of these :cry:
Get with it ,Get over it ,Get on with it .....OR LEAVE
ssc87
Posts: 97
Joined: Wed Aug 12, 2009 11:34 pm
Location: Newy

Whats your address, i forgot bout this.
Luck my car is a convert manual, it was still under the seat
User avatar
rf4burns
Posts: 162
Joined: Fri Sep 03, 2010 7:26 pm
Location: Central QLD

PM'd you. Stu
Get with it ,Get over it ,Get on with it .....OR LEAVE
User avatar
rf4burns
Posts: 162
Joined: Fri Sep 03, 2010 7:26 pm
Location: Central QLD

Awesome ssc87 Thanks for the shift computer :bow: . Still after an F8B Auto Box :pray: this mightyboy box has got knobs on :(
Get with it ,Get over it ,Get on with it .....OR LEAVE
User avatar
rf4burns
Posts: 162
Joined: Fri Sep 03, 2010 7:26 pm
Location: Central QLD

Still after an F8B Auto Box :pray:
Get with it ,Get over it ,Get on with it .....OR LEAVE
User avatar
Tez
Posts: 1176
Joined: Wed Sep 03, 2008 9:38 pm
Location: Croydon, Vic

Got one here I ain't going to be using...
Hope to have it split off the donk before the weekend is out.
No Idea what condition it's in - it does work in first and reverse - not tried 2nd.
Tez
So the adventure continues...
User avatar
rf4burns
Posts: 162
Joined: Fri Sep 03, 2010 7:26 pm
Location: Central QLD

Ok Tez Let me know when you are ready and let me know what you want for it. Freight to 4680.
Get with it ,Get over it ,Get on with it .....OR LEAVE
User avatar
Tez
Posts: 1176
Joined: Wed Sep 03, 2008 9:38 pm
Location: Croydon, Vic

I got the torque convertor off the crown-wheel tonight and weighed and measured the trans - I'll see if the storeman at work tomorrow can get me a price to freight a box roughly 500x500x400 weighing about 35 kilo's to you...
If you're happy and send the freight money, I'll box it up and it's yours. :thumbup1:
Stay tuned for an update...
AutoTrans.jpg
Tez
So the adventure continues...
Post Reply