WTB: FRONT MOUNT INTERCOOLER

For all your Suzuki wants and needs
Post Reply
User avatar
xrs
Posts: 37
Joined: Sun Apr 18, 2004 7:05 pm
Location: Brisbane, Queensland
Contact:
Contact xrs

The core is 90mm think :D
Top
mowog
Posts: 970
Joined: Sun Apr 25, 2004 2:22 am

I have no clues really on turbos, but it occured to me that transmission coolers are cheap and do gearboxes. Why can't you use one on a turbo?
Top
User avatar
Brayden
Posts: 9101
Joined: Sun Apr 11, 2004 3:09 am
Location: Canberra ACT
Contact:
Contact Brayden

Tranny oil coolers are fine for liquid, but they can't handle large volumes of air.

xrs, sorry mate, 90mm core is about 40mm thicker than I can use.
F8B EFI turbo - Three pots and a snail.
Top
User avatar
Josh
Posts: 1263
Joined: Tue Apr 13, 2004 2:22 am
Location: Canberra ACT
Contact:
Contact Josh

The tranny oil cooler cores are usually only a single length of 10mm pipe bent at 180° all over the place in my experience... Far too restrictive for large volumes of high-pressure air. :wink:
[url=http://www.tamon.org/?page=owners&id=10][img]http://www.tamon.org/forum/images/ute_specs.gif[/img][/url]
Top
chomp on this
Posts: 33
Joined: Mon Sep 12, 2005 5:36 pm
Location: B Hill but relocating

do yas reckon a stock JSPEC cooler of a galant Vr4 will fit?
sorry unsure of dimensions just wondering if any one knows from experience?
none for ya
Top
User avatar
Josh
Posts: 1263
Joined: Tue Apr 13, 2004 2:22 am
Location: Canberra ACT
Contact:
Contact Josh

:NFI:
[url=http://www.tamon.org/?page=owners&id=10][img]http://www.tamon.org/forum/images/ute_specs.gif[/img][/url]
Top
User avatar
Goofy[HSK]
Posts: 630
Joined: Tue Nov 15, 2005 9:33 pm
Location: South Australia
Contact:
Contact Goofy[HSK]

chomp on this wrote:do yas reckon a stock JSPEC cooler of a galant Vr4 will fit?
sorry unsure of dimensions just wondering if any one knows from experience?
JDM vr4 = 420x205x65mm (WxHxD) (core size)
maybe your thinking of the a-spec one? which is quite small
'89 Alto Works RS/R - Awaiting: Paint, Windscreen, Compliance, Lottery
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
Top
chomp on this
Posts: 33
Joined: Mon Sep 12, 2005 5:36 pm
Location: B Hill but relocating

JDM vr4 = 420x205x65mm (WxHxD) (core size)
maybe your thinking of the a-spec one? which is quite small
will them dimensions fit in mb good???.. i know that the a spec ones are tiny compared to j spec coolers
none for ya
Top
User avatar
Brayden
Posts: 9101
Joined: Sun Apr 11, 2004 3:09 am
Location: Canberra ACT
Contact:
Contact Brayden

It will fit as a top mount above the gearbox, but as a front mount you've got buckleys.

Hell I'm having trouble trying to mount a cooler that is about 250x150x50mm on my ute, and it has a full size front bar on it.
F8B EFI turbo - Three pots and a snail.
Top
Post Reply

Return to “Wanted to Buy”