WTB: FRONT MOUNT INTERCOOLER
- mighty_grl
- Posts: 61
- Joined: Sun Dec 25, 2005 6:26 pm
- Location: Lismore,nsw
looking for a front mount intercooler smll enough for a mighty boy. piping is necessary too
try a stock one from a 180sx
[url=http://tamon.edave.net/gallery/v/members/Hewball/][img]http://www.tamon.org/forum/images/per_gall.gif[/img][/url]
- mighty_grl
- Posts: 61
- Joined: Sun Dec 25, 2005 6:26 pm
- Location: Lismore,nsw
read the subject prick...you aint got one? then dont comment
- mighty_grl
- Posts: 61
- Joined: Sun Dec 25, 2005 6:26 pm
- Location: Lismore,nsw
sue me..ive decided to keep the top mount on it. Too much muckin around for a front
i was not saying i had one i was saying what you needed to look for
[url=http://tamon.edave.net/gallery/v/members/Hewball/][img]http://www.tamon.org/forum/images/per_gall.gif[/img][/url]
This size any good to you
Length (Overall) Tip to Tip 710mm (28")
Core 560mm (22")
Height 200mm (8")
Inlet/Outlet Pipe Ends 2.5" (63mm)
Tested Working PSI 30~35PSI
Its a very nice size, and should fit under/behind MB Bumper
Length (Overall) Tip to Tip 710mm (28")
Core 560mm (22")
Height 200mm (8")
Inlet/Outlet Pipe Ends 2.5" (63mm)
Tested Working PSI 30~35PSI
Its a very nice size, and should fit under/behind MB Bumper
- stevan_istheman
- Posts: 851
- Joined: Tue Nov 02, 2004 10:13 am
- Location: Sunshine Coast, Queensland
- Contact:
I really doubt that size intercooler will be even close to fitting on the front of a mightyboy...
Unless you cut out the front end like all the wannabe pulsar, corolla and so on drivers.
Is it obvious i don't like 4 cylinder cars?
Unless you cut out the front end like all the wannabe pulsar, corolla and so on drivers.
Is it obvious i don't like 4 cylinder cars?
BAL4 Designs
For all your mechanical design and drafting requirements.
For all your mechanical design and drafting requirements.
But you dig 3, right?
[url=http://www.tamon.org/?page=owners&id=10][img]http://www.tamon.org/forum/images/ute_specs.gif[/img][/url]
xrs, what's the thickness of the cooler?
F8B EFI turbo - Three pots and a snail.
- stevan_istheman
- Posts: 851
- Joined: Tue Nov 02, 2004 10:13 am
- Location: Sunshine Coast, Queensland
- Contact:
3 Cylinders Rock!!!
BAL4 Designs
For all your mechanical design and drafting requirements.
For all your mechanical design and drafting requirements.