Hey, just been trying to track down a set of nuts to suit my mags but am having a LOT of trouble. Just about nobody stocks 10mm wheel nuts let alone the sort i need for my wheels...
The wheel brand is Speedy, and they have a "tunnel" of sorts that the wheel nut goes in. They are a hex head (Like an allen key). I have 7 of the 16 nuts i need, but would most likely just but 16 all at once.
If anybody has nuts the same style as i have described and are willing to part with them, id be more than happy to take them off your hands. Otherwise, if anyone has any ideas as to where i can get a set from, that would be equally as good! I seem to think that i am gonna need to get them custom made up, but would prefer to buy them from a packet...
Cheers
WTB:~Wheel nuts
- stevan_istheman
- Posts: 851
- Joined: Tue Nov 02, 2004 10:13 am
- Location: Sunshine Coast, Queensland
- Contact:
I got my wheel nuts from car bitz in caloundra...
They're not lock nuts, just the standard tapered type ones.
I guess repco or similar could get them for you, I don't think they're listed in the book so you'll just have to get them to ring up and ask.
Hope this helps.
They're not lock nuts, just the standard tapered type ones.
I guess repco or similar could get them for you, I don't think they're listed in the book so you'll just have to get them to ring up and ask.
Hope this helps.
BAL4 Designs
For all your mechanical design and drafting requirements.
For all your mechanical design and drafting requirements.
- Brokenshire
- Posts: 695
- Joined: Sun Feb 27, 2005 1:40 pm
- Location: Nelson Bay
- Contact:
I'm in the same boat Ceej
Missing 6 wheel nuts in total. But i've got two lock nuts that fit, but no-one seams to be able to get any more of them for me either
Missing 6 wheel nuts in total. But i've got two lock nuts that fit, but no-one seams to be able to get any more of them for me either
They're called "barrel nuts", and like any other mag wheel nut for the MightyBoy, custom made is your answer.
F8B EFI turbo - Three pots and a snail.
Don't fear Chris, you can buy blank barrel nuts and have them tapped the same as your old ones. Shouldn't cost you more than $80.
F8B EFI turbo - Three pots and a snail.
na its easy as long as u have the right thread lol and u start the tap square!
What I meant was that your current wheel nuts were made by tapping a set of blanks, same as any wheel/tyre shop could do for you with a set of barrel nuts.
Would I bother tapping them myself for $5.50 per nut? Not likely!
Would I bother tapping them myself for $5.50 per nut? Not likely!
F8B EFI turbo - Three pots and a snail.
I've seen them in the catalogue, so whoever drills them should be able to source them!
F8B EFI turbo - Three pots and a snail.
- stevan_istheman
- Posts: 851
- Joined: Tue Nov 02, 2004 10:13 am
- Location: Sunshine Coast, Queensland
- Contact:
So you're looking for lock nuts or just wheel nuts?
BAL4 Designs
For all your mechanical design and drafting requirements.
For all your mechanical design and drafting requirements.
- Brokenshire
- Posts: 695
- Joined: Sun Feb 27, 2005 1:40 pm
- Location: Nelson Bay
- Contact:
Not sure about Ceej, But I'd be happy with just wheel nuts.
- stevan_istheman
- Posts: 851
- Joined: Tue Nov 02, 2004 10:13 am
- Location: Sunshine Coast, Queensland
- Contact:
Hey guys, i got a part number for some wheel nuts...
NICE Products
Item: Wheel nuts
Size:10x1.25mm
Part No: NN560C
Here's the distributors:
http://www.niceproducts.com.au/distributors.htm
P.S.
I couldn't remember if the MB's were 1.25 or 1.5 pitch so i asked for details of the 1.25
But there is a listing for 1.5 just in case i'm wrong.
NICE Products
Item: Wheel nuts
Size:10x1.25mm
Part No: NN560C
Here's the distributors:
http://www.niceproducts.com.au/distributors.htm
P.S.
I couldn't remember if the MB's were 1.25 or 1.5 pitch so i asked for details of the 1.25
But there is a listing for 1.5 just in case i'm wrong.
BAL4 Designs
For all your mechanical design and drafting requirements.
For all your mechanical design and drafting requirements.