Any one got any idea how i can get this body kit
found it in Google looking for pictures of altos
heres the link to the website
http://www.k-takeoff.com/catalog/aero/suzuki_alto.htm
and here it is translated to English
http://www.google.com/translate?u=http% ... en&ie=UTF8
oh yeah! picking up this bad boy on Saturday
SUPER ALTO WORKS Body kit
I'll do it tonight and post back here to confirm. (You'll need to know because your login will change too!)Alto_boy wrote: if any one can change my user name to Alto_guy that would be awesome
As for the bodykit, your best bet would be seeing if greenline.jp can get it for you. If they can't then you've got buckley's chance.
F8B EFI turbo - Three pots and a snail.
Done.
F8B EFI turbo - Three pots and a snail.
- Goofy[HSK]
- Posts: 630
- Joined: Tue Nov 15, 2005 9:33 pm
- Location: South Australia
- Contact:
congrats on the purchase.. say goodbye to your money lol
i'd send off an email to k-takeoff and see if they have any distributors
i'd send off an email to k-takeoff and see if they have any distributors
'89 Alto Works RS/R - Awaiting: Paint, Windscreen, Compliance, Lottery
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
Have a good look for rust before you decide to paint, those imports are well known rust buckets. I can vouch for that first hand.
F8B EFI turbo - Three pots and a snail.
- Goofy[HSK]
- Posts: 630
- Joined: Tue Nov 15, 2005 9:33 pm
- Location: South Australia
- Contact:
Heres a list of what i've gotten for mine so far (with contact details)
http://users.on.net/~goofyhsk/CapaSport.pdf
http://users.on.net/~goofyhsk/SuzukiSport.pdf
After all that its still in shell stage with no motor (which I lost half the parts too)
http://users.on.net/~goofyhsk/CapaSport.pdf
http://users.on.net/~goofyhsk/SuzukiSport.pdf
After all that its still in shell stage with no motor (which I lost half the parts too)
'89 Alto Works RS/R - Awaiting: Paint, Windscreen, Compliance, Lottery
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
- Rogue_Works
- Posts: 67
- Joined: Wed Dec 14, 2011 12:16 pm
- Location: Kempsey, NSW
INsaNEeD:
the AUD is pretty shit at the moment to be honest, that and, as I understand, the YEN is still relatively strong, i.e. wrong time for importing parts... a few months ago the AUD was about 100 Yen, now i think its closer to 120 Yen, the difference?
Front Bar - Yen: 44100 AUD: 546.53 (a few months ago it would have been AUD$441.00)
Rear Bar - Yen: 44100 AUD: 546.53
Side Skirts - Yen: 40950 AUD: 507.49 (these may take alot of work to get to fit)
i dont think you'll need any more than that for a sweet bodykit, but remember, that kit is a wide body kit, so the front and rear guards are wider than standard too.
so, in just 4 pieces of fibreglass, you've got yourself about $1600 + shipping and probably taxes at the docks etc.
that is for the "SUPER ALTO WORKS"
below it (click the link to the site - ktakeoff.something, its in the first post) is the "CROSS ALTO WORKS", there thay have a generic suzuki side skirt, pretty bland but yeah, AUD$517.90 the pair plus shipping, etc.
so... failing that? make your own!
http://www.teammightyboy.com/forum/view ... =28&t=6196
that said, stuff it up and it will probably look ghetto, check out the link i posted above, me and my father, zero experience working with high density foam, no idea about how to use fibreglass but a master of bog... these are just foam templates for the moulds for the kit, but are exactly how they should turn out
so, a few late nights with a dust mask? or still keen on several grand for a kit (although its a pretty phat kit!)
the AUD is pretty shit at the moment to be honest, that and, as I understand, the YEN is still relatively strong, i.e. wrong time for importing parts... a few months ago the AUD was about 100 Yen, now i think its closer to 120 Yen, the difference?
Front Bar - Yen: 44100 AUD: 546.53 (a few months ago it would have been AUD$441.00)
Rear Bar - Yen: 44100 AUD: 546.53
Side Skirts - Yen: 40950 AUD: 507.49 (these may take alot of work to get to fit)
i dont think you'll need any more than that for a sweet bodykit, but remember, that kit is a wide body kit, so the front and rear guards are wider than standard too.
so, in just 4 pieces of fibreglass, you've got yourself about $1600 + shipping and probably taxes at the docks etc.
that is for the "SUPER ALTO WORKS"
below it (click the link to the site - ktakeoff.something, its in the first post) is the "CROSS ALTO WORKS", there thay have a generic suzuki side skirt, pretty bland but yeah, AUD$517.90 the pair plus shipping, etc.
so... failing that? make your own!
http://www.teammightyboy.com/forum/view ... =28&t=6196
that said, stuff it up and it will probably look ghetto, check out the link i posted above, me and my father, zero experience working with high density foam, no idea about how to use fibreglass but a master of bog... these are just foam templates for the moulds for the kit, but are exactly how they should turn out
so, a few late nights with a dust mask? or still keen on several grand for a kit (although its a pretty phat kit!)
"c'mon guys, it's not that small"