4SALE: FWD SOHC F6A TURBO MOTOR/INTERCOOLER

Need to offload some Suzuki parts? Do it here.
Post Reply
Chi
Posts: 1
Joined: Wed Nov 03, 2004 8:47 pm

Hey All,
Up 4Sale is a SUZUKI F6A motor which i had previously purchased for a mightyboy conversion project.

TURBO, EFI, INTERCOOLER, 660cc.

Also has air con (which i have taken off so it be re-attatched)
This motor was an import from Japan, and i had been told that it was out of an older Suzuki Jimny.

I had ordered it from SA with no gearbox. I had trouble finding one so i decided to go 4 an easier 550cc motor.

So if anyone is interested in the motor, please let me know.
I PAYED $550 FOR THE MOTOR WITH $120 FREIGHT. ALL UP = $670.00
QUICK SALE
$190 :-o

Chi
written_on_ya_kitten@hotmail.com
Top
User avatar
Brayden
Posts: 9101
Joined: Sun Apr 11, 2004 3:09 am
Location: Canberra ACT
Contact:
Contact Brayden

You've got mail champ!
F8B EFI turbo - Three pots and a snail.
Top
User avatar
Josh
Posts: 1263
Joined: Tue Apr 13, 2004 2:22 am
Location: Canberra ACT
Contact:
Contact Josh

Ooooo... I like where this is going... 8)
[url=http://www.tamon.org/?page=owners&id=10][img]http://www.tamon.org/forum/images/ute_specs.gif[/img][/url]
Top
User avatar
Brayden
Posts: 9101
Joined: Sun Apr 11, 2004 3:09 am
Location: Canberra ACT
Contact:
Contact Brayden

Not in your ute thats for sure! :P
F8B EFI turbo - Three pots and a snail.
Top
User avatar
Josh
Posts: 1263
Joined: Tue Apr 13, 2004 2:22 am
Location: Canberra ACT
Contact:
Contact Josh

:P
[url=http://www.tamon.org/?page=owners&id=10][img]http://www.tamon.org/forum/images/ute_specs.gif[/img][/url]
Top
User avatar
eDave
Posts: 513
Joined: Mon Apr 12, 2004 9:11 pm
Location: Sydney, Australia
Contact:
Contact eDave

no, Braydens buying it for me so I can have a backup engine....
AREN'T YOU BRAYDEN!!?? hmm!!?? :P :wink:

such a nice guy!!
Top
User avatar
Brayden
Posts: 9101
Joined: Sun Apr 11, 2004 3:09 am
Location: Canberra ACT
Contact:
Contact Brayden

A backup for a ute that won't be driven anytime in the forseeable future? :P

Actually I'd say that would be doable. :wink:
F8B EFI turbo - Three pots and a snail.
Top
Fosgate
Posts: 5
Joined: Tue Jan 04, 2005 2:19 pm
Location: Sydney, Australia
Contact:
Contact Fosgate

hey is that engine still for sale?
Will that bolt into the mighty boy?
Top
User avatar
Brayden
Posts: 9101
Joined: Sun Apr 11, 2004 3:09 am
Location: Canberra ACT
Contact:
Contact Brayden

Sorry mate I bought it. Should have posted sooner.

The F6A will go into a MightyBoy with about $2k worth of engineering.
F8B EFI turbo - Three pots and a snail.
Top
Fosgate
Posts: 5
Joined: Tue Jan 04, 2005 2:19 pm
Location: Sydney, Australia
Contact:
Contact Fosgate

Well its good to know that it went to a good home...
Could you please tell me how hard is it to tranplat that engine into a MB?
Can you use the stock 4 speed gearbox? Anything need to be custome mate?

thanks
Top
User avatar
Brayden
Posts: 9101
Joined: Sun Apr 11, 2004 3:09 am
Location: Canberra ACT
Contact:
Contact Brayden

The F6A will bolt up to the stock 4 speed gearbox, but I wouldn't recommend it.
You'd still need custom engine mounts, an electric fuel pump, ECU wiring, the list goes on.

If you want a turbo MB then the best thing to do (not that it is particularly easy) is to purchase an F6A front cut and install the whole thing, with the matching 5 speed gearbox. ;)
F8B EFI turbo - Three pots and a snail.
Top
Fosgate
Posts: 5
Joined: Tue Jan 04, 2005 2:19 pm
Location: Sydney, Australia
Contact:
Contact Fosgate

And what car does F6A turbo engine come in?
Am i going to be needing a custom drive shafts and mounts even with the front cut?

I been recoing and doing engine transplants on Mazda/Ford TX3/GTX for the past 7 years or so ... And im alot confortable with EFI then a carbs...
ECU and wiring is not a problem as far as im concerned.

Thanks
Top
Post Reply

Return to “For Sale”