15" rims for sale $400

[hongster]

the above pictured 15" wheels / rims are for sale

2x rims have 95% sumitomo rubber 195/50/15 the other 2 have 195/45/15 80% nangkang, i have got 4x25mm bolt on hub spacers but they will be at an extra cost

Price: $400
(I did pay $600 for the rims plus $350 for the rubber, and the ute has only gone thru 1 full tank of juice since fitting them on!!!!!)

Location: Adelaide city, or southern/northern areas

Contact: e.g. PM, Phone 0411 090 415

willing to send interstate,,, got a qoute from greyhound bus company they said $150 to goford in NSW... so its a rough figure unless someone's got a cousin of a cousins mate brother that can get it cheaper..

[suzutey]

what was the offset of them? r they 4x114 stud pattern

[hongster]

yes they are 4x 114.3

and just for those wondering if they will fit on your ride...

below is hub spacers ive also got for sale (price yet to be decided)
which for those that don't know bolt on to your hub and then you bolt the rims onto to them
the ones ive got pictured are 25mm (only two pictured but i have 4x) so it'll effectivley add 25mm of width to clear struts/fill gauards/clear body work

also off set is unknown but its roughly 13cm from the rear face to the edge (estimated only by a cheap ruler so +/-1cm)

[Brayden]

The rims should have an offset value stamped on the back of one of the spokes. ET38, ET42, etc.

[hongster]

CONFIRMED
offset stamped says 43
pcd 114.3

PRICE NOW $400

[Nehemiah]

Let me know if you sell the spacers...

Cheers,
Sam

[Brayden]

Are the rims 6" or 6.5" wide?

[hongster]

6.5" wide, which is why i got 25mm spacers..

[hongster]

These are still for sale.......

just had i guy ask if they would fit his 1985 hatch?

anyone know if they would or have seen a 85 suzi with 15"s

[Brayden]

6.5" is too wide for a Hatch. They will bolt on but foul on the arches.

[Mr Anderson]

6.5" is too wide for a Hatch. They will bolt on but foul on the arches.

I assume similar issues for fitment to a mighty boy with or without spacers.

[Brayden]

Bingo. The tyre size and width of the rim are the show-stoppers.

[SuzukiTurbz]

Spewing i want some nice wheels for ma suzuki hatch :'(

[Mr Anderson]

So I've made myself familiar with what spec 15's will fit a mighty boy with minor to no mod's - but wondering if anyone knows where suitable rims are selling?

Taleb Tyres had Abatis that were suitable but sold out and I am aware of the Hyundai steelies that should be obtainable from a wrecker.

Any other known sources?

[holk]

Speeedy, ROH and CSA (and few more) have models in their range of 14x6 and 15x6 that fit. However, like most nice things, expensive. If then you want some custom made stuff, there is a place that does "watanabe style" mini lights in whatever specs you want/ (Most good tyre places should put you into the right direction). Great stuff, but expect not much change out of $250 per corner (rims only).