Mb Stalks

[Billie]

Hey need some mighty boy blinker and wiper stalks, mine broke while driving and couldnt get any blinkers, scary stuff. Need sort of urgently. thanks.

[Billie]

Do suzuki hatch ones fit?

[Brayden]

If the stalks have broken you need to replace the combination switch. I suspect the problem might be caused by the boss kit you had to "hammer" on.

[Billie]

Defs from the boss kit. The original boss kit just slipped on. I read another post about the boss kit and another person had to hammer it on, so i thought it was normal. Me thinks i shall use the original steering wheel until i can get a wheel to suit my other boss kit that fitted perfectly. Thats what i meant by stalks, the whole plastic thing under the steering wheel. The hatch one should fit right? Just without the intermediate wiper?

[Brayden]

The part that comprises the indicator and wiper stalks is known as a combination switch. Not sure if a Hatch one fits. Never tried it.

[Billie]

Only one way to find out i guess.

[Billie]

Only one way to find out i guess.

[JB]

If the boss had to be hammered into place, it sounds as if there is a very good chance the spline/boss is incorrect, and therefore now damaged. If you intend on returning the original boss and wheel, I would suggest you inspect the splines. The last thing you want is to lose your steering.

[holk]

The hatch combination switch is not a direct swap: one of the 2 plugs is different shape and (from memory) it has one less pin, which is probably the intermittent wiper.
However, with a bit of patience, everything is possible

[lambo74]

http://www.suzistore.com.au/shopexd.asp?id=741

Try this, i bought one of these for my mb,works great but no intermittent wipers.

[Billie]

Hey lambo, does it go straight on?

[lambo74]

Yeah mate sure does, all the plugs are the same.

[Billie]

Sweet as.

I think i can live without intermediate wipers

[Husky]

Hey Billie,
I had the same problem with my saas boss kit (134bk) from memory.
I had to hammer it on, where the original just slipped on? I can stil use the original if I wanted to.

[Billie]

Did your indicator cancelers snap too?

I have a old style boss kit, just need a wheel for it. Or cut the indicator canceling pins. But for now i'll use the standard wheel, dnt want to be forking out 150 everytime i break those things.