Team MightyBoy

hey guyz just purchased a suzuki hatch.. and have already ngiht shaded the rear lights and sprayed grille black.. my future mods are gonna be -
spray interior black
blue leds
chrome window winders
sports steering wheel
suzuki gear knob
black carpet throughtout
INSANE sound system
...
now i dont kno what seats to replace with these.. that are dark grey or black..
dnt kno were to buy 3 cyl tacho and shift light..
what body kits are there for these?
any good suspension suggested?
and what can u do to a normal suzuki 1985 hatch motor to gie it more balls?
etc.. exhaust system, CAI System.. what else lol
cheers guyz

speco sell them for around 100. Easy to find on ebay.

Might want dual battery or bigger alternator if your going to have a massive sound system Mine with 2 12 inch subs and amp with 4 speakers with 4 channel amp use to make it nearly die at idle from so much current drop, turn the music down and the revs went back up hehe. I have a falcon ef alternator (110amp).

You might get away with a hybrid battery - part starting part deep cycle in the one case. I don't know how much bigger you can get under the bonnet though. If you put a battery inside the car, avoid using a normal lead acid type - they produce hydrogen. Aside from displacing essential oxygen in the passenger space hydrogen is highly volatile Use a sealed battery instead.

I think its cheaper to do the ef alternator, and it doesnt need replacing every 4-5 years

so should i buy a ef alternator and a larger battery?
Deffinetly buyign the alternator but will i need a larger battery aswell?

i have to run -

4 Neons (Undercar)
2 Neons (Incar)
4 6.5" Speakers
2 Tweeters
1 12" Subwoofer
2 Amplifiers
1 Headunit
2 CrossOvers
????

Thankyou Guyz

Ohh. That stuff should be fine on the stock alternator.

I have umm, alot of watts from mine lol.

Its about to get worse, 2 15's

hmm but should i buy theother alternator just incase?

Maybe, you will need all the alternator wiring done, 25 or so to 110 amp can melt wires. Also a custom tensioning bracket is required, but the holding bracket at the bottom fits perfectly. I have a pic in my gallery of it, i think.

hmm do u kno how much that would cost liek the rewirign and brakcets?

umm $200 for a auto elec to do it, bracket free if u got a welder

cheers bro