88 alto works, parts needed
Hi all, new to the site, i just got hold of a 88 alto works rsr that has had an engine swap at some stage i think, its now got the 660cc dohc in it, the car has been registered before but needs work to get back up to scratch to get it on the road again as its been sitting in a car port for approx 3 years, parts im chasing (that i know of so far) are a front windscreen, and seal, passenger side rear window, im happy to source them from overseas if needed but just dont know where to start, if anyone can help or point me in the right direction it would be appreciated, also it has a blown turbo and i have heard rumours that there is a turbo kit with injectors, ecu upgrade, can anyone confirm this and if so, who does it? thanks everyone, look foward to reading some helpful info and getting this little beast back on the road.
- kei_spec_rsr
- Posts: 106
- Joined: Thu Apr 23, 2009 11:08 am
- Location: sydney
Hi, i can help you with f6a parts as i have a few complete engines. is the alto the cc72v or the later shape?? cheers
Parting out the alto
Need it all gone asap
wrecking cc72v alto
Need it all gone asap
wrecking cc72v alto
to be honest im still getting to know the models, and i pick it up next week(well tow truck does) so cant just go and have a look, its the round head light shape if that helps, the first of the round headlight shape im told, do u know of the turbo upgrade kit i mentioned? if i got to replace the turbo anyway im thinkin might as well go for the upgrade
http://www.tamon.org/forum/viewtopic.php?t=5195 its the same shape as this one, i hope bomber doesnt mind me stealin his pic, and hope link thing works
- Goofy[HSK]
- Posts: 630
- Joined: Tue Nov 15, 2005 9:33 pm
- Location: South Australia
- Contact:
yeah import monster or similar + yahoo auctions is the best way
search for CL11V, CM11V and CR22S i think
one of the same looking models here
http://www.suzuki-w.co.jp/history2/alto/altkeifu.html
http://www.suzuki-w.co.jp/history2/works/workeifu.html
cheapest screen i found was for cr22s i reckon
EDIT: I did speak to a glass place once, but need to take the care there, which I can't do
search for CL11V, CM11V and CR22S i think
one of the same looking models here
http://www.suzuki-w.co.jp/history2/alto/altkeifu.html
http://www.suzuki-w.co.jp/history2/works/workeifu.html
cheapest screen i found was for cr22s i reckon
EDIT: I did speak to a glass place once, but need to take the care there, which I can't do
'89 Alto Works RS/R - Awaiting: Paint, Windscreen, Compliance, Lottery
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
hi all, got the alto at home now, dont know if someting fishy is going on but the model code is ca91v, im not up to speed with all the models but that just doesnt sound right and im thinkin the build plates have been swapped, can anyone shed some light on this for me cause the car is the same shape as the cm11v, any help would be appreciated
Some sneaky bugger has put the plate off a local CA91V model Alto on a CL11V to try and get it registered. Dodgy!
F8B EFI turbo - Three pots and a snail.
Unlikely.
F8B EFI turbo - Three pots and a snail.
- Goofy[HSK]
- Posts: 630
- Joined: Tue Nov 15, 2005 9:33 pm
- Location: South Australia
- Contact:
damn, thats a bit annoying
'89 Alto Works RS/R - Awaiting: Paint, Windscreen, Compliance, Lottery
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
- Goofy[HSK]
- Posts: 630
- Joined: Tue Nov 15, 2005 9:33 pm
- Location: South Australia
- Contact:
I'm currently trying to get some parts bought and shipped on a mates container;
If I was able to get a windscreen for say $2-300AUD total (to SA) - would you be interested?
(current cheapest i've found is $120AU - but I have no idea what extras I have to add to that (yet))
If I was able to get a windscreen for say $2-300AUD total (to SA) - would you be interested?
(current cheapest i've found is $120AU - but I have no idea what extras I have to add to that (yet))
'89 Alto Works RS/R - Awaiting: Paint, Windscreen, Compliance, Lottery
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
hey goofy, i actually bought another rolling shell, the one that was on ebay, its got all import approval papers etc so im gonna put all my running gear in that, so thanx for the offer but all the glass is in tact on the shell, but what i am chasing is the f90 turbo/ecu upgrade kit for the f6a, cant find anywhere that has it available, you know anything about it? also where is the engine number on the f6a?
- Goofy[HSK]
- Posts: 630
- Joined: Tue Nov 15, 2005 9:33 pm
- Location: South Australia
- Contact:
I'd try Suzuki Sport direct for that info@suzukisport.com
Quick geez at my engine, only spot I could see was just above the alternator
Quick geez at my engine, only spot I could see was just above the alternator
'89 Alto Works RS/R - Awaiting: Paint, Windscreen, Compliance, Lottery
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com