Team MightyBoy

benny wrote:Ok goofy, I have front speakers in mine, they screw into the back of those vent bits, into the dash itself, look about 4 inch mate, do u want me get a pic for u?

No way!

Yes please, many pics

Ok goofy, I hope this works, first time posting pics, there is a black metal bracket that screws to the back side of the vent (2screws) then speaker screws to that bracket

Cheers, they look good - I'm going to say they aren't OEM
There's some slight cutting of the plastic bottom left, and the bottom left screw seems the wrong orientation compared to the 'tab'
But that's very helpful for working out how I can create one.

Your probably right mate, i will have a closer look tomorrow, guess someone helped me out with putting them in, lol, will be easy as to swap for some better speakers, let me know if u want anymore pics etc, also did u ever end up putting 12mm wheel studs in?

benny wrote:Your probably right mate, i will have a closer look tomorrow, guess someone helped me out with putting them in, lol, will be easy as to swap for some better speakers, let me know if u want anymore pics etc, also did u ever end up putting 12mm wheel studs in?

If you could snap a couple pics of the bracket by itself that'd be cool.

I bought 12mm studs for the rear, never got them pressed in though. Can grab the part number if you need. Pretty sure you'd have to pull the axles out to put them in.
The black alto has 12mm on the front already as it has swift stuff I think. I can't remember if I found out the right numbers to redo the stock front hubs.

No worries, will undo brackets and take some pics, I will be running swift fronts as well so was curious about the rear mate, will have to get axle seals and might even do bearings while im there so i know all is new

benny wrote:No worries, will undo brackets and take some pics, I will be running swift fronts as well so was curious about the rear mate, will have to get axle seals and might even do bearings while im there so i know all is new

I cant find my bunch of rear studs to check at the moment. Possibly NS429
44251, Spacer - 44251-76G00
46870, Bearing - 09262-30103
43485, Ring Retainer - 43485-67000
43491, Seal - 43491-70D01
43588, Protector - 43588-72000

So on this (end) build it has swift struts, hubs and brakes
I wish to use my fancy brand new stock struts - but the bottom mount holes are different to the swift;
Is there another Suzuki hub/brake setup that has the alto / mb spec strut holes?

Shit mate just noticed I didn't get those pics of speaker brackets for u, if u still want them I can do over the weekend mate, I don't know off the top of my head about other hubs/struts that the same mate

Just curious mate what year swift parts u using? Are they gti parts?

benny wrote:Just curious mate what year swift parts u using? Are they gti parts?

No idea, the setup came with the last RSR I bought,
Think the disc rotor matches SF310/413, SA413

231 diam, 17mm thick

mkay, still trying to put the import F6A back together - which will go in this white one for a while.

Existing turbo has a hole in it


So have to fix that to use that one,
Spare F5B turbo is a bit suspect, bearings probably bad;
'New' Hitachi i've had for years is probably fake, and front housing hits the oil warmer as its bigger;
Or could use the one from the black F6A

Decisions  :NFI:

How many altos u actually got? Lol

Hitachi (non) fitment pics




Also on that list above;
Import F6A - VZ14 9011 26 220B 13900-64D00
Hitachi - HT07-5 8Y21
Black F6A - VZ25 9505 15 169B 13900-65F01
First F5B - 8907 17154B

Hitachi is biggest, however oddly the biggest front wheel of the rest is the F5B


Benny: 3 Cars, 4 Engines, 5 Turbos

EDIT: I wonder if the Cappa oil filter mount would fit the chassis - assuming I could tap holes in the block for it decently.

Turbo housing still at 'mates' waiting to be modified - 2months or so now

Engine still not back together.
New control arms here
New rack ends here
Found some tie rods I bought eons ago

Almost bought some KYB struts from japan for this one, ended up finding some SA items on ebay.. $70 for the pair!
Means I have to play with the hub holes though.


Not enjoying driving it currently, front end is wobbling and knocking all the time.

EDIT: Anyone certain whether Alto springs will fit the Swift struts?
I have new Alto ones coming soon, so I'll have a Alto set spare.