Strut brace
I'm pretty sure SuzukiSport made them back in the day, but you'd be fortunate to get one now. Shouldn't be too difficult to make one though, a length of chromoly tube welded to some 3mm flat semi-circles. Put in a thread at each end if you want tension adjustment. Swift guys have been making their own for years.
F8B EFI turbo - Three pots and a snail.
- Goofy[HSK]
- Posts: 630
- Joined: Tue Nov 15, 2005 9:33 pm
- Location: South Australia
- Contact:
You mean a hatch brace?
'89 Alto Works RS/R - Awaiting: Paint, Windscreen, Compliance, Lottery
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
Yeah goofy would be a hatch bar/brace type thing, I didn't know what to call it due to the shocks not actually going into the inside of the car so just thought ppl would know what I ment if I said strut brace, lol, just wold like to stiffen up the tail end a bit
- Goofy[HSK]
- Posts: 630
- Joined: Tue Nov 15, 2005 9:33 pm
- Location: South Australia
- Contact:
Don't think I've seen a off the shelf one,
Often they just customise other models rears and bolt to the rear window latches
Often they just customise other models rears and bolt to the rear window latches
'89 Alto Works RS/R - Awaiting: Paint, Windscreen, Compliance, Lottery
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
- Goofy[HSK]
- Posts: 630
- Joined: Tue Nov 15, 2005 9:33 pm
- Location: South Australia
- Contact:
http://minkara.carview.co.jp/en/car/SUZ ... i=6&ci=643
Still browsing, seen EK9 ones mentioned twice so far
Still browsing, seen EK9 ones mentioned twice so far
'89 Alto Works RS/R - Awaiting: Paint, Windscreen, Compliance, Lottery
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
- Goofy[HSK]
- Posts: 630
- Joined: Tue Nov 15, 2005 9:33 pm
- Location: South Australia
- Contact:
That they do, But we don't have them
They are all HA alto installs
http://www.kc-technica.com/tuning/ha11s ... r_bar.html
http://www.kc-technica.com/tuning/ha11s ... r_bar.html
http://www.spiegel.co.jp/product/body/r ... uzuki.html
You could use the back seat lugs perhaps
They are all HA alto installs
http://www.kc-technica.com/tuning/ha11s ... r_bar.html
http://www.kc-technica.com/tuning/ha11s ... r_bar.html
http://www.spiegel.co.jp/product/body/r ... uzuki.html
You could use the back seat lugs perhaps
'89 Alto Works RS/R - Awaiting: Paint, Windscreen, Compliance, Lottery
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com