hey guys just got a carry 1981 st90 with a f10a swap but still on the stock 4 speed what i want to know is the flywheel has hotspots so its shakes the car to bits if u take off wrong. goin to be geting a new clutch off ebay and get the flywheels faced just need to know what clutch to get f8a carry one because its still got the stock 4 speed or f10a carry one as of the motor or can i use a f10a sierra one.
will be posting up photos once my rims from yahoo japan land.
new to carrys clutch help
F8A clutch kit is what you want. The disc and pressure plate are the same for both F10A/F8A, but the release bearing is different, and you need the one that fits on the F8A gearbox input shaft.
This is assuming that the gearbox is an ST90 four speed, because the SK410 (that the F10A came from) also came in a four speed as well. It would be a good idea to confirm that before you buy.
This is assuming that the gearbox is an ST90 four speed, because the SK410 (that the F10A came from) also came in a four speed as well. It would be a good idea to confirm that before you buy.
F8B EFI turbo - Three pots and a snail.