selling parts from 1988 alto

Need to offload some Suzuki parts? Do it here.
User avatar
pegusas1969
Posts: 68
Joined: Fri Aug 16, 2013 8:21 am
Location: brisbane

Hi everyone,
i have recently purchased a 1988 Suzuki Alto GA.
I'm going to use the motor (F8B) to put into my boy and as it has air-conditioning i think i will need to transplant the wiring as well. can someone please confirm this if possible.

as i wont need much else apart from the following iam looking a recouping some of the cost of the car by selling anything that can be sold.

1) MOTOR
2) COMPLETE DASH
3) WIRING HARNESS IF NEEDED
4) WINDSCREEN

NO REASONABLE OFFERS REFUSED
the car is an Automatic and has the rear seat installed (with Qld) mod plate. the back of the seat itself is in fairly bad nick but all the latches and hinges work well

please let me know if there is any thing you want. I have some photos but if you would like any other pictures of the car, it is at my work so i can post them the next day.

thanks
darryl.
Attachments
QLD Mod Plate
QLD Mod Plate
1988 Alto GA Automatic
1988 Alto GA Automatic
rear seat
rear seat
If near enough was good life would be boring.
Ya Hya Chouhada
weejimmy
Posts: 17
Joined: Tue Feb 19, 2013 5:07 pm

would you post the auto box to WA?
any ideas on cost ?
User avatar
pegusas1969
Posts: 68
Joined: Fri Aug 16, 2013 8:21 am
Location: brisbane

hi weejimmy,
i will get a rough price for you tommorrow and let you know. do you need any thing else?
thanks
darryl
If near enough was good life would be boring.
Ya Hya Chouhada
User avatar
Matty
Posts: 281
Joined: Sun Nov 15, 2009 11:02 am
Location: Scottsdale, Tas

Are the external mirrors the same as a mightyboy?

If they are And are in good condition I'll take them
One day it will be DONE!!!
Fireboy
Posts: 11
Joined: Tue Feb 18, 2014 8:38 pm
Location: Warragul

I'll take the headlight retainers and the washer bottle and pump. :)
User avatar
pegusas1969
Posts: 68
Joined: Fri Aug 16, 2013 8:21 am
Location: brisbane

hi matty,
yes the mirrors are the same but the condition of the glass is woe-ful. I looked at using them as spares for my Boy but they are no good. the plastic and metal parts are okay.if thats okay please PM me your offer.
thanks
darryl
If near enough was good life would be boring.
Ya Hya Chouhada
User avatar
pegusas1969
Posts: 68
Joined: Fri Aug 16, 2013 8:21 am
Location: brisbane

hi fire boy,
the headlight retainer are rusted to pieces sorry.
the washer bottle and pump looks okay.
I will post pictures when I get home.
please PM me with your offer and location so I can work out the post to you
thanks
darryl
If near enough was good life would be boring.
Ya Hya Chouhada
User avatar
pegusas1969
Posts: 68
Joined: Fri Aug 16, 2013 8:21 am
Location: brisbane

water bottle and pump
water bottle and pump
here are some pictures of parts that have been asked for so far.
Attachments
passenger side
passenger side
passenger side front
passenger side front
driver side
driver side
driver side mirror front
driver side mirror front
whats left of headlight retainers(this was the good side)
whats left of headlight retainers(this was the good side)
If near enough was good life would be boring.
Ya Hya Chouhada
User avatar
pegusas1969
Posts: 68
Joined: Fri Aug 16, 2013 8:21 am
Location: brisbane

hi again,
weejimmy i have done a rough cost for shipping to WA.
i weighed a manual gearbox i have here at 30Kg. freight to malaga Wa (you didn't let me know where in WA) will be $100.00 via E-go freight.

the box size was 60cm cubed.
most freight companies dont like to ship car parts because of oil leaking.
If near enough was good life would be boring.
Ya Hya Chouhada
mowog
Posts: 970
Joined: Sun Apr 25, 2004 2:22 am

if you are planning to freight anthing google ego problems first. they lost my holden petrol tank. and they don't have phone so you can't contact them easily it all goes by email. also they insidt on credit card paymant and apparently have been known to add to your bill after.
weejimmy
Posts: 17
Joined: Tue Feb 19, 2013 5:07 pm

hey buddy thanks for that, but i got it sorted so no need any more, thanks thoe
User avatar
Matty
Posts: 281
Joined: Sun Nov 15, 2009 11:02 am
Location: Scottsdale, Tas

I'll take the mirrors mate.

Pm me your details etc
One day it will be DONE!!!
User avatar
Jermaine
Posts: 1387
Joined: Tue Jan 24, 2006 8:49 pm
Location: Legerwood (tasmania)
Contact:

what condition is the engine and how much are u after
User avatar
pegusas1969
Posts: 68
Joined: Fri Aug 16, 2013 8:21 am
Location: brisbane

hi jermaine,
sorry for the confusion the list at the start is what i want to keep everything else is for sale.

i do have another motor that i purchased a while ago that you might be interested in.
i have no idea what condition the motor is in because it was missing parts and in pieces. i have turned the pulleys and they move okay. the mounts that are on it at the moment are not part of the sale i have to check the condition on the one on the alto. please let me know if you are interested.
thanks
darryl
Attachments
touched up 3.jpg
touched up 4.jpg
touched up 2.jpg
touched up 1.jpg
If near enough was good life would be boring.
Ya Hya Chouhada
hake25
Posts: 2
Joined: Mon Jan 20, 2014 4:33 pm
Location: port pirie

Front and rear bars? Are they for sale? Haha
Post Reply