Hi everyone,
iam about to start putting together my engine(f8B) and gearbox but need the bolts that attach the clutch to the fly wheel. I'am swapping an auto gearbox for a manual one. I have the flywheel and clutch is arriving shortly from Perth (ebay). if anyone has some spares or can tell me where i can get them please let me know.
thanks
darryl
wanted clutch mounting bolts
- pegusas1969
- Posts: 68
- Joined: Fri Aug 16, 2013 8:21 am
- Location: brisbane
If near enough was good life would be boring.
Ya Hya Chouhada
Ya Hya Chouhada
Your local bolt supplies (not hardware /rural supplies) will be able to help with grade 8, 10 or 12 bolts. I'm not remembering the required tensile rating. All you need to do is tell them the diameter, thread pitch,length & head type. The flexplate bolts should give all but the length - add the thickness difference of flywheel & flexplate to get the length needed.
So many delays to getting my MB back in order with 993cc & 5 speed transaxle... neighbor issue gone, donor shell up on rotisserie, new sheds on the way.... another project also..