As title states - chasing some inserts (or complete shocks) for an ST90... Any condition considered as the ones I have (koni) are beyond rebuildable condition.
Please help, happy to pay for interstate freight etc.
Elton
M: 0433371332
WTB - ST90 front shock inserts
I've never heard of inserts being used on a Carry van. Shame the Koni's you have are beyond repair.
You might have luck sourcing new Suzuki struts from India where they still produce that model.
You might have luck sourcing new Suzuki struts from India where they still produce that model.
F8B EFI turbo - Three pots and a snail.
-
- Posts: 5
- Joined: Tue Nov 03, 2015 12:15 pm
- Location: Brisbane
This may not be answering your question directly, but I have a set on Nissan Sunny struts in my ST80. They bolt up to the lower ball joint with only minor modification (drilling holes to 12mm) and use a similar strut top mount. You can get parts for them much easier and you get disc brakes. I have the Sunny two piston at the moment, but you can fit all manner of brakes that have a 76mm (3") spacing, like most of GM and Volvo 4 spots. They are a bit longer though but give you negative camber and wider track width which is nice.