Gearbox inspection plate screws
So previously i managed to snap 3 screws of the 5 that held the inspection plate on for the gearbox i then attempted to remove them causing more damage. i have since taken it to an engineering shop and they could only remove 2 of the 3 with the 3rd being to broken to remove i am wondering if it is still OK to drive with 4 of the 5 screws bolted nice and tight ( i have purcashed a new o-ring seal).
Put it together, and if it doesn't leak then happy days!
F8B EFI turbo - Three pots and a snail.