Page 1 of 2
FS: Parts cleanup - Round 1
Posted: Fri Dec 30, 2016 4:38 pm
by Brayden
I'm going through my collection of 15 years worth of parts and having a clean out.
Here's what I've found to start with:
Alto RS Turbo (CA72V) plastic side skirts - A few scratches, but crack free - $200
Tonneau cover #1 - Under bar, press stud and latch style. Two small tears, needs restitching - $30
Tonneau cover #2 - Under bar, press stud & latch style. Material okay, needs restitching - $30
Tonneau cover #3 - Over bar, press stud & channel style. Never fitted, dirty from storage - $60
Starter motors (x4) - all tested and working. $20ea
Tail lights (pair) - complete with plugs and surrounds, no cracks or scratches.
SOLD
Headlights (x5) - original Stanley brand, tested and working. $10ea, $20 for the one with surround
Mixed box of carby parts - Includes one complete AUTO carby and half a dozen disassembled manual ones - $50 the lot
Pickup preferred (only option for heavier items) but postage okay for smaller/lighter items.
Re: FS: Parts cleanup - Round 1
Posted: Sat Dec 31, 2016 5:39 pm
by frednutz
brayden it is ian mitchell if the tail lights are still available i would like them
Re: FS: Parts cleanup - Round 1
Posted: Sat Dec 31, 2016 11:33 pm
by Brayden
Yep, still available. Want me to email you some better pics?
Re: FS: Parts cleanup - Round 1
Posted: Sun Jan 01, 2017 4:54 pm
by frednutz
no just tell me how you want the money and how much for postage or do you want me to pick them up
Re: FS: Parts cleanup - Round 1
Posted: Sun Jan 01, 2017 7:11 pm
by Brayden
Canberra might be a bit far from where you are for pickup, postage estimate is about $20.
Re: FS: Parts cleanup - Round 1
Posted: Mon Jan 02, 2017 12:49 am
by frednutz
15 hour round trip
but post will do
Re: FS: Parts cleanup - Round 1
Posted: Tue Jan 10, 2017 7:53 pm
by Eamon
is it possible to post a picture of the various carby parts or a list of whats in the box will do
and do you have any carby parts (jets) for an F8B because right now ive got an f5a carby on my f8b engine.
thanks
Re: FS: Parts cleanup - Round 1
Posted: Tue Jan 10, 2017 8:06 pm
by Eamon
Also the Torreno cover sounds nice but i dont know where to get the sides of the mb clipped to put it on
Re: FS: Parts cleanup - Round 1
Posted: Tue Jan 10, 2017 8:57 pm
by Brayden
I'll pull out the box of carby bits and see what's in there. Tonneau covers attach with these studs around the sides:
http://www.ebay.com.au/itm/like/1420956 ... 107&chn=ps
Fasteners for under the rear window look like this:
http://www.ebay.com/itm/10-Common-Sense ... 1541727899
One of the covers uses a water tight channel instead. I might still have one laying around.
Re: FS: Parts cleanup - Round 1
Posted: Thu Jan 12, 2017 3:24 pm
by Eamon
Alright cheers
if it is to heavy / unrealistic to ship the box of carbie parts i would definitely be interested in the better quality tonneau cover. Could you possibly get an estimate on postage to 4343 area. If you need more details pm me
Re: FS: Parts cleanup - Round 1
Posted: Thu Jan 26, 2017 9:40 pm
by Tay
Those headlights, are they good for the carry? Mine has rusted out and will be looking at getting some soon.
Cheers.
Tay
Re: FS: Parts cleanup - Round 1
Posted: Thu Jan 26, 2017 10:03 pm
by Brayden
Yeah, same/same.
Re: FS: Parts cleanup - Round 1
Posted: Wed Feb 22, 2017 11:36 am
by Jellety
Iis one of those under bar tarps still available?
Re: FS: Parts cleanup - Round 1
Posted: Sat Feb 25, 2017 10:29 pm
by rf4burns
If this
"Tonneau cover #3 - Over bar, press stud & channel style. Never fitted, dirty from storage - $60"
Is still available consider it sold . PM to payment + arrange post RF.
Re: FS: Parts cleanup - Round 1
Posted: Mon Feb 27, 2017 7:38 pm
by Brayden
Both under and over bar tarps still available.
Pls email postage details to
brayden@teammightyboy.com and I'll send payment info.