Thank you for reply. had a look under car couldn't see any signs of where it could be hitting, I bounced the car a few times and both sides seem to be ok & struts are dry around shock inserts with no noise or clunking. do you know if it is possable to lift the boy about 1 - 2" at the front ...

Hey guys.... this may sound strange but is there a way of lifting the front of the mighty toy by about 1" - 2" ( besides putting it on a jack ) I go on alot of dirt roads and the front sounds like it is bottoming out. I had alook at the guards to see if the chivet mags are hitting anywhere...

Thanks guys feels like I'm getting somewhere now. I'll wait to see if Brayden has a set if not I'll give them a call. the ones I ordered in was m10x1.25 but the thread was all wrong and the outside dia of the shank was smaller, so maybe the m10x1.5 are the ones to go. maybe, cris

Thank you for the offer Brayden. that would be great even if they are a bit tatty I can get them cleaned up. work out a price with postage, I live in the Blue Mountains NSW, get back to me when you can. thanks again. cris

Hey guys. I'm having trouble in locating a full set of mag wheel nuts to suit my M/boy. I have a set of Cheviot 12 x 5 mags and got a set of mag nuts made for the m/b from a local tyre place, when I got them the thread was wrong and the shank was about 1 - 2 ml to small. the guy said these where to ...

mmm I had a Vw bettle that did the exact thing,Over hauld the carbi, then some1 said that if the 2 motor valve in the fuel pump from fuel tank is worn or has a bit of grit in it the fuel would back flow down flow to tank....so replaced that as well. not sure about that 1. but what it turned out to b...

Thank you for that Jermaine & Brayden. I think I'll go with putting in a F8b box to suit the motor.

Hey all, hope you can help. My M/b has a 800 motor and I'm sure that the old 550 gear box is still in it looking at the post on how to tell the differance, just got the car and haven't drove it much. needs some work..... what things are different with having the 550 box in it with speed and grunt or...

thank you for all that. I have spoken to a guy who had alot to do with welding and making some. he said he mightbe able to knock one up as he has made a few in the past

thanks for this. I have a box in the shed , didn't know which one it was but will look thanks again.cris

ok don't laugh, but has anybody seen a bull bar or a nudge bar that would fit on a m/b... I don't want one made out of coke cans ta

Have you found the problem yet? when you pulled down the top end did you inspect all the bores for cracks or hairline? was the new head shaved , maybe its worped a bit and exposing one of the water jackets to the inlet manifold pushing water into it then going into all the cylinders. or get the inle...

Thanks brayden, just found it. the new tamon site looks great

Hey guy's. I'm sure this question has been asked before, had a look but couldn't see anything. I'm taking out my 550cc motor and gear box from my M/B and replacing it with a 800cc and box. can this be a direct swap and is the drive shafts, splines, engine cradle, speedo drive the same. any help woul...

Hi. I guess this may be a bit late , but I was able to replace both front lower ball joints. these are part of the lower control arm, purchased from Scotts Auto one for about $56.00 each cris