hi, straight to the point (no time). do you have or can you get conrods (std factory) good used cond, for F5at DOHC? one set (3) rods. How many $$$$. thanks.

BUM.......... thanks any how.

hi guys can any bodyhelp me with a wiring diagram for a 2006 alto fitted with a K6A turbo mtr? im fitting one to a hatch. have done mts, front mount cooler, piping, rad/tor fit up gear shift, drive shafts. basic all complete except wiring. i have factory computor and loom ( wich ill be using) need w...

if your bearings are the small jurnal size of 32 mm ish (im not at home to measure at moment) ring derick on 0732051020 as he carrys them in std and under size.

well guys the answer to all this is.#1. cams identical grinds from factory. #2 valve size idencal f8b,f5a. sohc. #3rockers,shafts,springs,retainers identical. #4port size (inlet only) smaller on f5a sohc. approx 22 mm f5a approx 28mm f8b. will vary a little due to casting. #5head bolts location ,thr...

Brayden yeah you are right it does run forged internals, custom aries pistons, the chambers are cc'd to 18cc i'not at home at the moment so i dont have the info on piston dome, the cr worked out to 12.5 approx(+- .1)

wild F8B head. modified by george haddad (victoria) "o" ringed, decked (c.r.approx 12.5 with suitable pistons) welded reshaped chambers. ported &straightened ports. flows enough air to suport approx 180 hp if used in turbo appl. (with correct turbo pistons) preforance multi angle valve...

the cam will fit & work in both.

f8c would need to making inxs of 100 fwhp to move ahatch (600 kgs) over the 400mtrs in 14 seconds wheel spin and getting it to the ground would be a problem. a std F8C makes 52 fwhp. for a F8C to make the hp we are talking( in N/A form) we need 9000rpm triple t.b. efi 12- 13 CR and camwith duration ...

tyres are about 12 months old if you view them inperson you can choose from 8 tyres. send me snail adress ill post photo.

yea g'day buddy, there is 2 sets of caster plates one set for one setting and another set for another setting. and for the lower blocks you can set it for 50 mm drop (one set of blocks) or 40mm drop with the other set. Postage is $10 to sydney so if we split the cost e.g.you pay $45to me and i send ...

Falken zeil low profile performance tyres (on 13" black rims) will have no clearance problems with std ride ht. (or close to) I ran them with 3'' lower ride ht (on a hatch)and they just needed the plastic gaurd liner trimed at front only. 4 wheels A/V & tyres have H speed rating. new price ...

sold!

sorry buddy i meant to put the caster plates in for $20 &blocks 4 $30 my bad. if you are still interested the whole lot 4 $40 & you pay post to sydney.

yea ian i willgo to $250 4 the box.