WTB: New strut tower caps
Anyone have a part number or source for new strut tower caps to suit a Hatch/MB? Mine are getting pretty shagged and need replacing!
F8B EFI turbo - Three pots and a snail.
Part number: S*09250-30003 / Description: CAP
That is from National Capital Motors, they are $4.90ea I believe. (From my receipts)
The Support itself is S*41710-78052 / Description: SUPPORT, FR ST
and they come in at $95.70ea (NCM again).
If you have trouble getting them at these prices (could be cost price) give me a yell, my mate works for em.
That is from National Capital Motors, they are $4.90ea I believe. (From my receipts)
The Support itself is S*41710-78052 / Description: SUPPORT, FR ST
and they come in at $95.70ea (NCM again).
If you have trouble getting them at these prices (could be cost price) give me a yell, my mate works for em.
Garry. Nuff sed!
Sorry it isn't the little plastic cap I am after, but the top "bush" I guess would be the accurate description.
Thanks for the heads-up mate, I'll pay a visit to NCM next week.
Thanks for the heads-up mate, I'll pay a visit to NCM next week.
F8B EFI turbo - Three pots and a snail.
These are often called strut bearing plates. I expect every MB in existence to be due for replacements but would be (delightfully) surprised to find any.
I was after a pair for the G11 Charade I had several years back & could only find secondhand - this runs true for most cars except Commodore & Falcon.
I will keep looking however.
EDIT: Just found www.rollersandliners.com.au - old bushes can be re-rubbered.
I was after a pair for the G11 Charade I had several years back & could only find secondhand - this runs true for most cars except Commodore & Falcon.
I will keep looking however.
EDIT: Just found www.rollersandliners.com.au - old bushes can be re-rubbered.
So many delays to getting my MB back in order with 993cc & 5 speed transaxle... neighbor issue gone, donor shell up on rotisserie, new sheds on the way.... another project also..
You're talking about the part which sits in the engine bay? - i.e. the big black thing with 3 bolt holes to the body ???Brayden wrote:Sorry it isn't the little plastic cap I am after, but the top "bush" I guess would be the accurate description.
If that's what you're talking about I might have the part numbers as I bought new ones a while back. Still haven't fitted them yet though...
I bought mine from suziwest
http://www.suziwest.com.au/shopping/sho ... Mighty+Boy
That's the one, Fritz. Mine were in great condition until I fitted the 15's. Totally worth it though.
F8B EFI turbo - Three pots and a snail.
LOL - I've not checked mine for a very long time. Although I have been thinking of finally fitting my koni's and the strut tops...
OK The Item number I have on my invoice is 41710-78052-G
I dont know if that's an official suzi pt number or just suzi west's code?...
I paid just short of $90 ea for mine.
OK The Item number I have on my invoice is 41710-78052-G
I dont know if that's an official suzi pt number or just suzi west's code?...
I paid just short of $90 ea for mine.
ceej wrote:The Support itself is S*41710-78052 / Description: SUPPORT, FR ST
and they come in at $95.70ea (NCM again).
We might be on to something here!fritz wrote:OK The Item number I have on my invoice is 41710-78052-G
I dont know if that's an official suzi pt number or just suzi west's code?...
I paid just short of $90 ea for mine.
Garry. Nuff sed!
Bonus. I'll order a set next week, unless I find some laying around the workshop that are in better condition.
F8B EFI turbo - Three pots and a snail.
paid $80 each for mine at the local holden place
Priced same (item 5) at Caloundra City Holden on the 15/11/2007 $140.00 each, 2 avail in Melb. more from factory at 10 days notice
So many delays to getting my MB back in order with 993cc & 5 speed transaxle... neighbor issue gone, donor shell up on rotisserie, new sheds on the way.... another project also..