***Edited***
I am selling the following parts on a first in, first served basis. Natually I don’t mind people putting their dibs in if they can pay, but I don’t want people putting dibs on things they cant pay for – that is stalling… So basically I will sell the parts to the first person who can pay. I will also be advertising the parts elsewhere, but will endeavour to keep this page updated to reflect progress on that front.
I don’t mind chasing up prices for postage, but PLEASE don’t ask for a shipping quote if you’re not serious about buying the item. – I don’t want to be spending all my time on chasing up quotes for time wasters.
Anyhoo, enough formalities. On to the good stuff…
Larger pictures of the stuff is here:
http://www.tamon.org/gallery/v/members/ ... +sale_001/
STRUTS, HUBS & NEW BRAKES
*** Sold! ***
F8B BOTTOM END
*** Sold! ***
STRUT TOWER ENGINE MOUNT
Strut tower engine mount to suit F8B engine. Complete unit. Ideal if your heater box engine mount is being affected by rust.
$45
15” MAGS
http://www.tamon.org/gallery/v/members/ ... 4.JPG.html
15” x 6 Rodney Jane ‘racer’. Rims do show some signs of wear including a bit of gutter rash on a couple of them..
These rims scrub on the rear when used with 2” lowering blocks – require trimming of the guard. They are fine for 99% of the time on a 2” lowered front (without being trimmed). I have only ever had them scrub the front gaurds over BIG potholes.
I’ll include 8 x 10mm wheel nuts.
Cost $650. Sell $250
FRONT GAURDS
Front gaurds from my yellow boy. These have been trimmed to accept bigger wheels and have alfa 156 repeator indicators instead of the normal ones. Both panels in excellent condition. - One was new prior to painting (new one cost $320 alone)
$250 for both - wont seperate for obvious reasons.
BATTERY TRAY
*** Sold! ***
RECONDITIONED RADIATOR
*** Sold! ***
NEW ENGINE HOSES
*** Sold! ***
TIE RODS & RACK ENDS
Rack ends & tie rod ends. All new, Never used. $70
STRUT TOPS
Brand new. Never used. Cost $180, sell $110. Postage included.
TAIL LIGHTS
*** Sold! ***
H4 HEADLIGHTS
*** Sold! ***
AUTOTECNICA BOSS KIT
Autotechnica 323 boss kit. Requires machining for optimal wheel grip - as per any Autotechnica boss kit. I had it mounted as is, but it's not overly safe. $40
PERFORMANCE REGROUND CAMSHAFT
*** Sold! ***
CLUTCH PRESSURE PLATE & THRUST BEARING
*** Sold! ***
5” SPLITS - SPEAKERS
Polk audio 5” splits. $60
Here http://www.polkaudio.com/caraudio/products/ex3550/
LOT OF MIGHTYBOY PARTS FOR SALE NOW WITH PICS
Wow . If only I had waited till now to do my suspension!!!
Anyhoo, I might be interested in the reground camshaft but am just wondering what sort of gains and pros/cons of using this instead of the normal cam. I am looking to so some N/A mods so am wondering if this would be a good start.
Shipping would be to Tasmania and yes, I can pay for it
Anyhoo, I might be interested in the reground camshaft but am just wondering what sort of gains and pros/cons of using this instead of the normal cam. I am looking to so some N/A mods so am wondering if this would be a good start.
Shipping would be to Tasmania and yes, I can pay for it
Speed Limited: I'm Pedalling as Fast as I Can
1987 Mighty Boy
Injected F8B (love it!)
http://www.freewebs.com/fitre/
1987 Mighty Boy
Injected F8B (love it!)
http://www.freewebs.com/fitre/
Yeah, and post Chrissy isn't the best time to be selling stuff either.
Still, no rush...
When I had the cam reground, the people at CEC told us that it was just a mild grind. I honestly dont know what performance gains you'd get from it as I have never used it. You'd have to assume that it's better than the origional though???
I also have a cam gear with a second keyhole for different cam timing. Dont ask me if it's advanced or retarded - I just know it lines up differently to the standard keyhole relative to the cam teeth.
I'll let that go for $20.
Still, no rush...
When I had the cam reground, the people at CEC told us that it was just a mild grind. I honestly dont know what performance gains you'd get from it as I have never used it. You'd have to assume that it's better than the origional though???
I also have a cam gear with a second keyhole for different cam timing. Dont ask me if it's advanced or retarded - I just know it lines up differently to the standard keyhole relative to the cam teeth.
I'll let that go for $20.
Yeah, I guess! Maybe some other users might like to share some knowledge/info on cam stuff ( I don't know a great deal).
As for the cam gear I guess I could get it
Would you separate some things also? I am after strut tops and tie rod ends. but just got some rack ends!
PM me if you prefer.
Jono.
As for the cam gear I guess I could get it
Would you separate some things also? I am after strut tops and tie rod ends. but just got some rack ends!
PM me if you prefer.
Jono.
Speed Limited: I'm Pedalling as Fast as I Can
1987 Mighty Boy
Injected F8B (love it!)
http://www.freewebs.com/fitre/
1987 Mighty Boy
Injected F8B (love it!)
http://www.freewebs.com/fitre/
- Brokenshire
- Posts: 695
- Joined: Sun Feb 27, 2005 1:40 pm
- Location: Nelson Bay
- Contact:
PM SentSTRUTS, HUBS & NEW BRAKES
Struts (Koni adjustable), hubs (with new bearings), new rotors, rekitted calipers (including new pistons), & brand new lucas pads. Never used. Cost $1010 (not including original parts or labour to fit bearings). Sell $550
Interested in the rims mate, how much rash?
F8B EFI turbo - Three pots and a snail.
No.mightyboy wrote:i dont much care bout the rash. any chance of talking you down to $200 for those rims? do you have ant other parts to get rid of?
- 3 of the rims are in very good nick. Only one has rash, and is missing the centre cap. Posibly the sort of item I'll have more luck with in the local trading post as people generally want to inspect them, and freight would be a PIA.
Hatchman - I'll let the Strut tops go for $120 (postage included)
hey fritz,
Im interested in the suspension and the headlights,
If ya still got them let me know and ill come pick them up this weekend
Im interested in the suspension and the headlights,
If ya still got them let me know and ill come pick them up this weekend
[url=http://tamon.edave.net/gallery/v/members/Hewball/][img]http://www.tamon.org/forum/images/per_gall.gif[/img][/url]
- mini_kompressor
- Posts: 322
- Joined: Sun Jan 13, 2008 8:00 pm
interested in the taillight lenses. How much all together with postage to Melbourne, Vic mate
-
- Posts: 12
- Joined: Mon Jul 09, 2007 3:55 pm
- Location: Yarra Valley Victoria
hey there its emily i need your address to get a more accurate quote for shipping-is it possible for you to email me your address?
cheers
emily
cheers
emily