Will these wheels fit???

[MightyMagic]

Size: 14x5

Offset: +45 (Will fit on cars that require +35 to +50 offset)

Centre Bore: 73.1

Finish: Silver

Fitment: 4x100 and 4x114.3 (These are multifit wheels and have both stud patterns)


Any help would be appreciated!! Thanks guys

[Brayden]

Yes they will fit easily but you'll need 165/55 tyres.

[Billie]

I ran 165/60/r14 with those exact specs, slight scrubbing on full lock. Could go 175/50/r14 which is easier to get there 165/55/14 and 155/55/14.

[MightyMagic]

Thanks heaps guys, finally I now have some mags for the boy :)

[Brayden]

Should have mentioned with that offset you'll probably need to trim the protrusions off the rear upper bump stops so the tyre doesn't rub.

[MightyMagic]

Thats an easy job, isnt it?

[Brayden]

A few minutes with an angle grinder.

[MightyMagic]

Sounds easy enough lol

[Billie]

They clear by a few mm with those wheels. No need to angle grind.

Should see my upper bump stops, nothing left of them to get calipers on the rear to clear them.

[MightyMagic]

My car has lowered springs in the front and 2 inch lowering blocks in the back, am i going to have to raise it again for my mags to fit?

[Brayden]

Depends on what tyres you're using.

[MightyMagic]

I can get 165/55s ordered in from a tyre shop

[Brayden]

The arches might need rolling but with +45mm offset I'd say it will be okay.

[MightyMagic]

Oh thats good. Thanks alot Brayden, your always there to help me when i need it lol

[Billie]

Had to roll my old boys guards with 165/60R14, standard height.