how to remove motor from 86 carry

Suzuki van tech question and answers.
Post Reply
evil1
Posts: 11
Joined: Thu Jun 12, 2008 3:01 pm

im the happiest person !
i bought my carry off Mad_Aussie for $250
well i bought the rims really
van came with it
he told me the engine was muffed, so here i was thinkin fark its gonna need a rebuild.
got it home cleaned it up degreased all the oil put a bit of oil in and cranked it. ran but didnt hold idle that well, pulled the choke and she was sweeet, had a look under the car and saw the oil leak straight away, was coming from the oil pressure sensor. replaced it with an aftermarket one with an oil pressure gauge in cabin, topped up with oil cranked her leak gone!, idle was fine with choke out, and once it warmed up choke went back in and idles perfect!
im stokedddd it runs soooo goood! 80km top speed ftl!
Top
User avatar
ike849
Posts: 360
Joined: Thu Dec 07, 2006 10:14 am
Location: Brisbane, Qld

i'd still say it needs a rebuild, as a leak at the oil pressure switch would mean that not enough oil/pressure has been reaching all the crank bearings.......especially the ones furtherest from the switch.

very good buy still!!!!! 8)
Top
Nehemiah
Posts: 148
Joined: Sat Aug 04, 2007 4:39 pm
Location: South Australia

Yeh, It's a cool van!
I wouldn't worry too much about a rebuild, wait till it dies good and proper!
[url=http://www.tamon.org/forum/viewtopic.php?t=2744]Can a G15A DOHC engine fit into a Carry Van? Short answer...Yes. Click for the long answer...[/url]
Top
User avatar
Jermaine
Posts: 1387
Joined: Tue Jan 24, 2006 8:49 pm
Location: Legerwood (tasmania)
Contact:
Contact Jermaine

then it will cost ya more.. :wink:
Top
evil1
Posts: 11
Joined: Thu Jun 12, 2008 3:01 pm

yeah when that day comes it comes.
Top
Nehemiah
Posts: 148
Joined: Sat Aug 04, 2007 4:39 pm
Location: South Australia

sorry what I meant to say was...

Yeh, It's a cool van!
I wouldn't worry too much about a rebuild, wait till it dies good and proper!

THEN put a G13B in it :twisted:
[url=http://www.tamon.org/forum/viewtopic.php?t=2744]Can a G15A DOHC engine fit into a Carry Van? Short answer...Yes. Click for the long answer...[/url]
Top
evil1
Posts: 11
Joined: Thu Jun 12, 2008 3:01 pm

Nehemiah wrote:sorry what I meant to say was...

Yeh, It's a cool van!
I wouldn't worry too much about a rebuild, wait till it dies good and proper!

THEN put a G13B in it :twisted:
whats that out of?
fark sorry about the nooby questions eh...im new to all this suzuki world.
i use to own n drift a 180sx, so big change for me
Top
User avatar
ceej
Posts: 1122
Joined: Mon Jan 09, 2006 10:34 pm
Location: Canberra, ACT

evil1 wrote:
Nehemiah wrote:sorry what I meant to say was...

Yeh, It's a cool van!
I wouldn't worry too much about a rebuild, wait till it dies good and proper!

THEN put a G13B in it :twisted:
whats that out of?
fark sorry about the nooby questions eh...im new to all this suzuki world.
i use to own n drift a 180sx, so big change for me
G13B is the Swift GTi DOHC 1.3lt engine. :wink:
Garry. Nuff sed!
Top
evil1
Posts: 11
Joined: Thu Jun 12, 2008 3:01 pm

ahh yeahh pretty common then eh.
is there a write up anywhere of how put one in?
Top
User avatar
ceej
Posts: 1122
Joined: Mon Jan 09, 2006 10:34 pm
Location: Canberra, ACT

http://www.tamon.org/forum/viewtopic.php?t=2744
Garry. Nuff sed!
Top
evil1
Posts: 11
Joined: Thu Jun 12, 2008 3:01 pm

can someone tell me if a 90 carry diff will fit into a 86 carry?
Top
Post Reply

Return to “Suzuki Carry / Every / Wagon R+”