Posted: Thu Jul 01, 2010 10:27 pm
those look just like my wheels 
Page 2 of 7
Posted: Thu Jul 01, 2010 10:28 pm
Does the motor that needs a new pump come with manifolds and dissy?
Posted: Thu Jul 01, 2010 10:46 pm
The motor is complete with gearbox, manifolds, turbo, intercooler,alternator, i will throw in a standard f6a dohc turbo dizzy,
it is in my car at the moment ,running sweet, just needs a water pump. i pulled into work the other morning and noticed water coming from the front of the engine in the waterpump area.
it is in my car at the moment ,running sweet, just needs a water pump. i pulled into work the other morning and noticed water coming from the front of the engine in the waterpump area.
Posted: Thu Jul 01, 2010 11:08 pm
Cheers - I'm keen on one of the motors, just not sure which. 
If either of them will be available by August 8 let me know, because I'll be in Sydney that weekend and might like to bring one back with me. 
If either of them will be available by August 8 let me know, because I'll be in Sydney that weekend and might like to bring one back with me. Posted: Fri Jul 02, 2010 12:08 am
what size tires?kei_spec_rsr wrote:I really need to sell it as engine and box.
wheels look like these but with new yokohama rubber
Posted: Fri Jul 02, 2010 1:33 pm
I would like to express interest in the other motor. The one that Brayden isn't looking in to along with the EMS, custom CAS and coil packs, gearbox and other ancillaries too.
Steven was saying something about having a motor with forged internals too... which motor was this? The one in the car (with leaking water pump) or the other one?
Steven was saying something about having a motor with forged internals too... which motor was this? The one in the car (with leaking water pump) or the other one?
Posted: Fri Jul 02, 2010 6:28 pm
This Qlder can't afford XXXX Gold & the water here is a worry
Like the wheels but the beer is closer to my budget for now.
Like the wheels but the beer is closer to my budget for now.
Posted: Fri Jul 02, 2010 7:24 pm
Tyre size is 165/55/14
Both motors are internally stock.
Both motors are internally stock.
Posted: Sat Jul 03, 2010 12:06 am
Can you give a bit of an indication on how many k's the engines/boxes have traveled? Any history etc? Just trying to get a bigger picture.
Posted: Sat Jul 03, 2010 11:07 am
Also interested in the front suspension assemblies, and exhaust system
Posted: Sat Jul 03, 2010 2:57 pm
Both motors are import motors, so not sure how many kms on them
Posted: Sun Jul 04, 2010 12:36 am
steering wheel
Posted: Mon Jul 05, 2010 12:14 am
do the wheels scrub in the wheel arch at all?
Posted: Mon Jul 05, 2010 12:20 am
I can answer that, i have the same rims, with 165/60R14 and they scrub a tiney bit, so i would assume those 55 profiles wouldnt
But dont take my word.
But dont take my word.
Posted: Mon Jul 05, 2010 12:21 am
is this still eoi or are you going ahead with the strip?
just asking as my missus will be in sydney in a couple of weeks and would save hassle of shipping
just asking as my missus will be in sydney in a couple of weeks and would save hassle of shipping