FS: Tons of MB bits!
Posted: Wed Nov 17, 2004 6:44 pm
I'm posting this on behalf of Barry, a former MB owner and TAMON regular:
4 800 heads all good very little corrosion may need decking.
3 dizzys
1 fuel pump
misc eng pulleys,cam belt adjusters,bits for the front of the motor
1 800 manual 2 core recon rad
1 500 boy man rad
1 clutch cable
1 800 speedo cable
5 front engine mounts
1 rear mount
1 800 ex man good threads
1 wiper motor
1 800 man spacer plate
1 800 front engine mount(the one that goes near the pulleys
misc carbys some in bits
1 set boy rear mud flaps
3 head lights
l/r side blinkers
2 man clutch,pressure plates,flywheels
3 starters
1 long 800 for reco
1 block with rods for reco
2 800 inlet mans
2 original dashs
2 interior lights
3 window winder arms
2 pass grab handles
If you're interested in anything (or everything) then give Barry an email:
mytboy@tpg.com.au
Make the subject MIGHTYBOY SPARES or something similar.
4 800 heads all good very little corrosion may need decking.
3 dizzys
1 fuel pump
misc eng pulleys,cam belt adjusters,bits for the front of the motor
1 800 manual 2 core recon rad
1 500 boy man rad
1 clutch cable
1 800 speedo cable
5 front engine mounts
1 rear mount
1 800 ex man good threads
1 wiper motor
1 800 man spacer plate
1 800 front engine mount(the one that goes near the pulleys
misc carbys some in bits
1 set boy rear mud flaps
3 head lights
l/r side blinkers
2 man clutch,pressure plates,flywheels
3 starters
1 long 800 for reco
1 block with rods for reco
2 800 inlet mans
2 original dashs
2 interior lights
3 window winder arms
2 pass grab handles
If you're interested in anything (or everything) then give Barry an email:
mytboy@tpg.com.au
Make the subject MIGHTYBOY SPARES or something similar.