Just about to do a engine conversion on a suzki sierra, putting a GTI twin cam in it. Does anyone know of a website or forum where i could get some info on this?
Thanks
Suzuki sierra
The guys on http://www.suzishop.com/forum (Sierra section) are heaps of help, but there's probably enough info on there to answer any questions.
Before you do the conversion, if it is for street then the G13B is fine, but if you want to fit massive mud tyres and go offroad then you're better off with the G16B conversion.
From what I know about the G13B conversion though, if you're starting with a G13BA Sierra then it is a pretty straight-forward swap, except you need an angle drive converter for the distributor. SuziSport sell those, along with any other parts you're likely to need.
Before you do the conversion, if it is for street then the G13B is fine, but if you want to fit massive mud tyres and go offroad then you're better off with the G16B conversion.
From what I know about the G13B conversion though, if you're starting with a G13BA Sierra then it is a pretty straight-forward swap, except you need an angle drive converter for the distributor. SuziSport sell those, along with any other parts you're likely to need.
F8B EFI turbo - Three pots and a snail.