Page 1 of 1
MB engine into Alto?
Posted: Mon Nov 16, 2009 1:03 pm
by Arctic Alto
Hi all,
Just wanted to check, that the MB engines fit into a Alto.
I know that the alto goes into an MB, but i noticed that the MB's have a extra engine mount at the top rear that attaches to the firewall.
Cheers
Craig
Posted: Mon Nov 16, 2009 1:14 pm
by holk
Craig,
The mounts are the same for the F5A. If installing an F8B there is an extra engine stabiliser which should come anyway with the engine craddle setup.
Posted: Mon Nov 16, 2009 1:16 pm
by holk
Sorry, you said "firewall" I thought "strut mount". The hatch has the rear mount on the firewall, at least the one I used, had it.
Posted: Mon Nov 16, 2009 3:27 pm
by Brayden
No you cannot put an MB engine into an Alto because the motor is missing the casting for the front engine mount.
Posted: Mon Nov 16, 2009 3:36 pm
by Arctic Alto
Bugger
I saw this on ebay and thought it would be good.
http://cgi.ebay.com.au/Suzuki-Mighty-Bo ... 4a9c42a913
oh well, i'll keep looking
Thanks guys
Craig
Posted: Mon Nov 16, 2009 5:21 pm
by Brayden
Steady on! You asked if an MB engine would go in an Alto - that MB has an 800cc engine which means it isn't standard and could have come from an Alto.
... and you know what that means.
![Wink ;)](./images/smilies/icon_wink.gif)
I'd be calling the guy and taking a look at it, see what the motor is out of.
Posted: Mon Nov 16, 2009 7:00 pm
by gazuga
and let me know if you want it so i dont bid against you
![Wink :wink:](./images/smilies/icon_wink.gif)