Team MightyBoy

Just wanted to say "Hi!" here before I start asking questions 'bout supercarrys.

I'm from Austria/Europe and got a '96 suzuki supercarry panel van in a bad condition.
A mate had to do a lot of welding, I bolt on new brakes and did a basic service (fluids, spark plugs, filters,...) to get it road legal again.

It's so much fun to drive at lower speeds, but it lacks of power in fourth and fifth gear. The F10A engine has done 110k kilometers. Some weight stripping helped a bit.

I'd like to do a G13BA or G13BB conversion, hope to solve the open issues here on the board, as there are some great & crazy mechanics in here

Cheers, Phil

ps: a picture of the supercar, now got 13" swift alloys fitted instead of the standard wheels

I'd reccomend looking through the other Carry threads as to what mods have been done. The info I have is that the F10a is the largest engine that phisically fits but I think I saw a thread regarding a K series engine.

yeh there is one on here with the k10a.

f10a and a 5 speed some bigger wheels thats the best your gonna get

thanks for your comments, guys.

just need to make sure the g13b bolts on directly to the stock supercarry gearbox, the rest should be "just" a lot of work, like wiring the G13B ECU
to the supercarry loom.

"Nehemiah" here on the board is doing it, but in a much more sophisticated way with turbo, different gearbox, relocated engine and so on.
http://www.teammightyboy.com/forum/view ... hilit=G15B

i'd like to keep the engine naturally aspirated, no engine location, stock gearbox, should make things a lot easier.

got a mate who is a good welder, so exhaust and engine mounts are no problem.

cheers, phil.