Page 1 of 1
1987 Suzuki every f5a turbo
Posted: Sat Jan 07, 2012 4:29 pm
by Mole79
Hi have just got my hands on every van. Need some advice as rod bearing let go and worn out rod and crank. Can I use any f5a motor and swap it or machine the crank and rod. The van is factory turbo,injected and 4wd. Any help would be appreciated.
Re: 1987 Suzuki every f5a turbo
Posted: Sun Jan 08, 2012 10:53 am
by Mole79
Pic of my van.
Re: 1987 Suzuki every f5a turbo
Posted: Sun Jan 08, 2012 4:11 pm
by Brayden
Depending on how bad the wear is you could machine it and fit oversize bearings. Personally I would stick an F8B bottom end in it (796cc) your head, sump, pickup should all bolt straight on. It would make it much more driveable, although you might need a piggyback ECU or slightly larger injectors to give it a bit more fuel.