Page 1 of 1

1988 Alto parts wanted

Posted: Mon Aug 13, 2012 10:36 pm
by paul990
Hi All,

i have an alto feb 1988 van 2 dr 2 seater

i'm after tail lights
brake booster
rh front indicator lense cover

I'm around the toowoomba area but travel to brisbane often.

If you have anything, please send me a PM

Thanks

Paul

Re: 1988 Alto parts wanted

Posted: Mon Aug 13, 2012 10:43 pm
by Brayden
Hi Paul,
Aus delivered Altos don't have a brake booster. Is yours a turbo import? If not then I suspect you mean brake master cylinder?

I might have a spare set of tail lights.
With the front indicator, do you need the repeater on the guard or the front bumper light?

Re: 1988 Alto parts wanted

Posted: Tue Aug 14, 2012 10:07 pm
by paul990
Brayden wrote:Hi Paul,
Aus delivered Altos don't have a brake booster. Is yours a turbo import? If not then I suspect you mean brake master cylinder?

I might have a spare set of tail lights.
With the front indicator, do you need the repeater on the guard or the front bumper light?
Hey,

Yep... your right... me not paying attention = having a master cylinder.

front indicator....i require the one on the front bumper. i'll try to attach pic . hopefully they work

Thanks
Paul

Image
Image

Re: 1988 Alto parts wanted

Posted: Tue Aug 14, 2012 10:38 pm
by Brayden
Yep cool, I'll see what parts I can find and post back with pics.
Interestingly you have the rear bumper from a turbo import Alto - hence why you have two places to mount the number plate. ;) If you'd be interested in swapping for a clean domestic bumper without the number place recess let me know, I have one here.

Re: 1988 Alto parts wanted

Posted: Tue Aug 14, 2012 10:47 pm
by paul990
awesome.

let me know what you got.
i'll let you know about the bumper. can you send some pics of the bumper you have ?
where are you located?

thanks
Paul

Re: 1988 Alto parts wanted

Posted: Wed Aug 15, 2012 7:24 pm
by Brayden
Located in Canberra. I've got an 86 Alto that's about to go to scrap metal and a whole bunch of parts left over from an 88 Alto.

Re: 1988 Alto parts wanted

Posted: Wed Aug 15, 2012 10:59 pm
by paul990
well that'll make it hard to send things lol

let me know if the taillights and brake master cylinder are any good and how much you want for them ?

also, would you know if a mighty boy master cylinder would fit my alto ?

Thanks

Re: 1988 Alto parts wanted

Posted: Thu Aug 16, 2012 6:56 pm
by Brayden
paul990 wrote:well that'll make it hard to send things lol
Not really. I've shipped bumpers from Adelaide to here before, and a gearbox from Brisbane for $25. I'll get pics of the lights but I don't have a spare master cylinder besides the one in the Alto, and to be honest I'm not sure if I could be bothered pulling the dash out to get to it!

Re: 1988 Alto parts wanted

Posted: Thu Aug 16, 2012 9:52 pm
by paul990
ok sounds good.

looking forward to to the pics

Thanks

Re: 1988 Alto parts wanted

Posted: Tue Aug 28, 2012 10:51 am
by paul990
I'm in need of rh front indicator lense asap.

pm me if you have any.

Thanks

Re: 1988 Alto parts wanted

Posted: Wed Aug 29, 2012 1:25 am
by mowog
Brayden do you have the triangular fixed window on the drivers side behind the rear door on the 4 door?

Re: 1988 Alto parts wanted

Posted: Wed Aug 29, 2012 7:31 pm
by Brayden
I've got an SB308 Alto - which only ever came as a 3 door in Australia.

Re: 1988 Alto parts wanted

Posted: Fri Aug 31, 2012 11:02 am
by paul990
Brayden wrote:I've got an SB308 Alto - which only ever came as a 3 door in Australia.
Hey Brayden,

You got a radiator for the alto ?

thanks

Re: 1988 Alto parts wanted

Posted: Fri Aug 31, 2012 6:31 pm
by Brayden
I'll have look around tomorrow for all the parts you've listed and report back. ;)

Re: 1988 Alto parts wanted

Posted: Sat Sep 01, 2012 7:33 pm
by paul990
Brayden wrote:I'll have look around tomorrow for all the parts you've listed and report back. ;)

Thanks