Modified MB for sale Canberra
Posted: Wed Aug 29, 2012 11:26 am
Hey guys,
Not in any great hurry to sell but space at my house is at a premium and I need some cash to finish of the race car so I thought that I would pop this up and see what sort of response I would get. I realise that some may think that the price is a little on the high side but I think it is reflective of the work that has gone into the car.
Specs:
Fitted with a G10A from a 1993 Suzuki Swift, the engine had 135,000km on it when it was fitted.
Engine has been fitted with 222 degree cam @ 0.50 thou with 0.365 lift
Custom extractors into 2" with 1.5" tail section and muffler
Honda Civic Alloy radiator with thermo.
Dyno tune and rejetting of the carby has been done to suit the cam and extractors.
5 Speed box with new CV boots and joints
Lightened flywheel and HD Exedy Clutch.
New Clutch Cable
Front end is from the swift with vented brakes and calipers
MK1 GTI Suzuki Sport struts and Kings spring.
All new bushes and rubbers in the front end including strut tops (over $500 in parts)
New nolothane bushed in the rear.
Custom mount rear sway bar 14mm
Wheels and tyres are 14" x 6.5" +15 offset Delta Mesh with 165/55/14 SM8000 tyres. Car with come with 3 spares.
The front and rear guards have been flared to clear the new tyres
Whole vehicle was resprayed in 2-Pack Toyota White
Interior has been tidied up with CD player and 6x9's fitted to rear deck area
Comes with sports steering wheel as well as the standard one.
There is a box of random bits and pieces that will come with the vehicle as well.
Bad points.
The horn on the sports steering wheel doesn't work
There are a number of scratches in the side windows
Some of the rust repairs that were done when the car was in Townsville are starting to show through no doubt due to the humidity at the time the repair was done. Nothing structral but might be an issue if you are OCD like me.
The vehicle will come with an Engineers Report for the ACT for all the modifications.
The vehicle is currently registered in QLD until November this year but will organise RWC for anyone that wants to transfer the rego to ACT.
The vehicle will also come with ITB's, adapter plate, 36-1 trigger wheel and reluctor pick up EFI fuel pump and 2m loom for an Adaptronic e402C ECU. The plan was to get it all fitted up and running but I just don't have the time.
So the price, like I said not in any hurry to sell so looking at around $5,500 with the EFI bits and pieces
There is significant detail in the build thread located here
http://www.teammightyboy.com/forum/view ... =28&t=4670
Not in any great hurry to sell but space at my house is at a premium and I need some cash to finish of the race car so I thought that I would pop this up and see what sort of response I would get. I realise that some may think that the price is a little on the high side but I think it is reflective of the work that has gone into the car.
Specs:
Fitted with a G10A from a 1993 Suzuki Swift, the engine had 135,000km on it when it was fitted.
Engine has been fitted with 222 degree cam @ 0.50 thou with 0.365 lift
Custom extractors into 2" with 1.5" tail section and muffler
Honda Civic Alloy radiator with thermo.
Dyno tune and rejetting of the carby has been done to suit the cam and extractors.
5 Speed box with new CV boots and joints
Lightened flywheel and HD Exedy Clutch.
New Clutch Cable
Front end is from the swift with vented brakes and calipers
MK1 GTI Suzuki Sport struts and Kings spring.
All new bushes and rubbers in the front end including strut tops (over $500 in parts)
New nolothane bushed in the rear.
Custom mount rear sway bar 14mm
Wheels and tyres are 14" x 6.5" +15 offset Delta Mesh with 165/55/14 SM8000 tyres. Car with come with 3 spares.
The front and rear guards have been flared to clear the new tyres
Whole vehicle was resprayed in 2-Pack Toyota White
Interior has been tidied up with CD player and 6x9's fitted to rear deck area
Comes with sports steering wheel as well as the standard one.
There is a box of random bits and pieces that will come with the vehicle as well.
Bad points.
The horn on the sports steering wheel doesn't work
There are a number of scratches in the side windows
Some of the rust repairs that were done when the car was in Townsville are starting to show through no doubt due to the humidity at the time the repair was done. Nothing structral but might be an issue if you are OCD like me.
The vehicle will come with an Engineers Report for the ACT for all the modifications.
The vehicle is currently registered in QLD until November this year but will organise RWC for anyone that wants to transfer the rego to ACT.
The vehicle will also come with ITB's, adapter plate, 36-1 trigger wheel and reluctor pick up EFI fuel pump and 2m loom for an Adaptronic e402C ECU. The plan was to get it all fitted up and running but I just don't have the time.
So the price, like I said not in any hurry to sell so looking at around $5,500 with the EFI bits and pieces
There is significant detail in the build thread located here
http://www.teammightyboy.com/forum/view ... =28&t=4670