most power?
ive got the most powerful boy. ive got a stock f8b with bad compression. 
probly bout 20-25hp.
power machine.
me217
probly bout 20-25hp.
power machine. me217
me217
1985 suzuki mighty boy : mods, f8b
1990 toyota mr2 gt import : mods, turbo timer, short shifter, 2.5" exhaust
1992 suzuki sierra : mods, g16b mpfi, 235's/75, snorkel & lift on the way.
1985 suzuki mighty boy : mods, f8b
1990 toyota mr2 gt import : mods, turbo timer, short shifter, 2.5" exhaust
1992 suzuki sierra : mods, g16b mpfi, 235's/75, snorkel & lift on the way.
Colin's ute makes the same power at the wheels as that ute does at the flywheel!Gladier wrote:it would definately be whoever bought that mightyboy from terrigal with the g13b
As for mine, well hopefully I'm only a few weeks away from finding out the weak figure it puts out on 7PSI.
F8B EFI turbo - Three pots and a snail.
be very interesting to see the results.
even if u dont meet your target. the engine its gotta run a hell lot better. depending on the features of the ecu. u'll have all the nice compensations such as idle, cold starts, fuel cut when backing off the accelerator etc...
even if u dont meet your target. the engine its gotta run a hell lot better. depending on the features of the ecu. u'll have all the nice compensations such as idle, cold starts, fuel cut when backing off the accelerator etc...
will be putting mine on the dyno in a couple of months hopefully... not expecting huge numbers from just an EFI swap but a tune should help it 
Speed Limited: I'm Pedalling as Fast as I Can
1987 Mighty Boy
Injected F8B (love it!)
http://www.freewebs.com/fitre/
1987 Mighty Boy
Injected F8B (love it!)
http://www.freewebs.com/fitre/
dont have hp number, but my f6b(12-13psi) ran a 16.2 with a heap of wheelspin and a blocked air filter at calder.
very nice! mine ran a 17.4 not pushing it hard no wheel spin or changing gears hard is that the 660cc single cam motor like mine? if so what mods? mine was stock dump pipe then 2 1/4 exhuast pod 8psi finished at 121kmh what speed did you finish at?
all good things come in 3s
-
kidwithahatch
- Posts: 151
- Joined: Sun Oct 29, 2006 10:15 pm
- Location: wardell, nsw
post pics of your supercharger setup when it is complete keen to see
I wish i was @ calder to see the Mighty boy run!
I've now got my F8b in the boy and running, but badly. Only have the f5a carby on it atm as the correct one is stuffed, rebuilding it soon. I'd love to throw it on a dyno & see what it has when it's running right, altho i know it won't be a lot, they had what 29kw or so at the flywheel?
I must say tho, since the swap, even running badly, the car is a totally new beastie, it accelerates so much better, and you can keep on the tail of other car's without much effort now. I'll be over the moon when it's running right.
/me now starts thinking, i gotta clear some room in the shed so i can hoard charade turbo bits to turbo the other f8b i have in there. More Power!
/insert Tim the Tool Man grunt!
Cheers
ToranaGuy
I've now got my F8b in the boy and running, but badly. Only have the f5a carby on it atm as the correct one is stuffed, rebuilding it soon. I'd love to throw it on a dyno & see what it has when it's running right, altho i know it won't be a lot, they had what 29kw or so at the flywheel?
I must say tho, since the swap, even running badly, the car is a totally new beastie, it accelerates so much better, and you can keep on the tail of other car's without much effort now. I'll be over the moon when it's running right.
/me now starts thinking, i gotta clear some room in the shed so i can hoard charade turbo bits to turbo the other f8b i have in there. More Power!
/insert Tim the Tool Man grunt!
Cheers
ToranaGuy
It's update time MB Parts list! send part info to toranaguy74@optusnet.com.au|