Oh, they played that card, no mods for P platers eh? It's a bit rich when you can't get a factory exhaust system for a mighty boy anymore.
Well, you will need to change the back bit that you can see to be more "factory like" ie no chrome tip, small pipe. Being a ute you could have your "real" exhaust exit say 1" after the rear axel & then have a factory looking rear bit fit to keep the cops happy.
Unless they try & get under the mighty boy they won't see the mods. Just make sure the exhaust is nice & quiet.
Cheers
ToranaGuy
how could they ! :(
It's update time MB Parts list! send part info to toranaguy74@optusnet.com.au|
yeh they did. which is a $320 fine. its so stupid tho. my freind got pulled up the next nyt by the same guy. for having 15inch ba stockies instead of 13s on a completely stock 80s deisal hiluxand because the face of the radio was to bright!!!! what's going on there. (dunno if u hav been out big hill way, but the policemans name was written in paint next to the "now leaving hoon capaital" coz he puts heaps of cars off)Oh, they played that card, no mods for P platers eh? It's a bit rich when you can't get a factory exhaust system for a mighty boy anymore.
as if p-platers arent targeted.
I've been out big hill way, and it's pretty big in a mighty boy!
Maybe it's time formal complaints are made against this copper, if he is really that bad & writing up fines for stupid things like " cd player too bright ". Depending on what the mod rules are for the hilux he may have been right with that one in regards to the tyres.
Cheers
ToranaGuy
Maybe it's time formal complaints are made against this copper, if he is really that bad & writing up fines for stupid things like " cd player too bright ". Depending on what the mod rules are for the hilux he may have been right with that one in regards to the tyres.
Cheers
ToranaGuy
It's update time MB Parts list! send part info to toranaguy74@optusnet.com.au|
there has been complaints. well the tyres were matched and had the exact same diametre. im glad i didnt have my mags on when i didnt get pulled over
he defected a pioneer demo car from melb. everthing on it was engineered, went straght thru roadworthy and was cleared.
he defected a pioneer demo car from melb. everthing on it was engineered, went straght thru roadworthy and was cleared.
Sounds like an anally retentive "restoration is the only way" "mods are sacrilege" sort.
BTW surely without forced induction a MB wouldn't exceed the power to weight limits for provisional drivers.
BTW surely without forced induction a MB wouldn't exceed the power to weight limits for provisional drivers.
So many delays to getting my MB back in order with 993cc & 5 speed transaxle... neighbor issue gone, donor shell up on rotisserie, new sheds on the way.... another project also..
What a goose! I hope the guys with the demo car went from the RWC place to Vic Roads to clear it, then straight to a lawyer & filed a suit against the copper. I personally would have.suzutey wrote:there has been complaints. well the tyres were matched and had the exact same diametre. im glad i didnt have my mags on when i didnt get pulled over
he defected a pioneer demo car from melb. everthing on it was engineered, went straght thru roadworthy and was cleared.
Reminders me of a time i got a defect on my torana when i was 19, i had a RWC done 2 days prior, and the certificate was still valid. I let the copper place it on my window, and as he was walking away feeling all high & mighty, i called him back, shown him the RWC & adv he can't defect a car that has a current RWC, and he had to rip it off & tear up the fine, in front of many people.
P platers under the new laws are not allowed any mods, which means if you can't get the stock part there are few car's P platers can actually drive.
Cheers
ToranaGuy
It's update time MB Parts list! send part info to toranaguy74@optusnet.com.au|
The officer only needs to defect you on suspicion of illegal modifications and order a full inspection and you are then royally screwed. I was defected for having my front number plate held on with cable ties, however because I had illegal mods on my ute I needed to get them engineered before I could clear the original defect.
Completely my own fault for having illegal mods, and I had to wear the concequences.
Of course the zero tolerance to mods for P platers means that whatever you do will be illegal, engineers certificate or not.
Completely my own fault for having illegal mods, and I had to wear the concequences.
Of course the zero tolerance to mods for P platers means that whatever you do will be illegal, engineers certificate or not.
F8B EFI turbo - Three pots and a snail.
Really want to get them wondering what hit them? Buy Kubota & make the new 'sport' mini/micro tractor pulls - just can't take them on major highways.
Similar money will get you the new all terrain Segway.
Yes, I am being facetious/sarcastic.
How are provisional drivers going to get on if they go EPV - its a modification
At least Qld has seen the light some with new bike laws going from 250cc limit to power to weight for new riders. Some 250cc bikes go harder than larger bikes.
Similar money will get you the new all terrain Segway.
Yes, I am being facetious/sarcastic.
How are provisional drivers going to get on if they go EPV - its a modification

So many delays to getting my MB back in order with 993cc & 5 speed transaxle... neighbor issue gone, donor shell up on rotisserie, new sheds on the way.... another project also..
- Brokenshire
- Posts: 695
- Joined: Sun Feb 27, 2005 1:40 pm
- Location: Nelson Bay
- Contact:
It's been power to weight for Learners and p's for motorbikes in NSW for ages.
They should do the same for Cars and be done with it.
I could have seen the natural flow if they did.
It is shit that you can't get past it even with an emgineers cert.
They should do the same for Cars and be done with it.
I could have seen the natural flow if they did.
It is shit that you can't get past it even with an emgineers cert.
they already have in vic. therz power to weight, no v8, no forced induction.It's been power to weight for Learners and p's for motorbikes in NSW for ages.
They should do the same for Cars and be done with it.
i have an f8b, its regod in my name with an f8b and i have never got in trouble for it. but they dont look to match the numbers, just at the tag that says f5a
We have had power to weight restrictions of 165kw / 1000kg for a very long time here in vic, along with a list of "restricted vehicles" that you couldn't drive.
The new laws of no mods for P platers are on top of the existing list & power rules. Too bad if you have a F5a mighty boy, it craps itself, can't be rebuilt so you get a F8b cause it's a drop in replacement, rebuild it & drop it in. Your not getting enough of a power or size upgrade too be dangerous, but you technically can't drive it. Even tho under the old law of power to weight it's way under.
I'd hate to be a p plater right now.
In regards to the motor bikes, they have a restricted list now, and you can ride some bikes up to what is it, 400cc or so depending on it's power output, but some 250cc bikes are restricted, like the KR 250, tandem twin 2 stroke, one hellova fast bike, especially for a 250, i've ridden one.
Cheers
ToranaGuy
The new laws of no mods for P platers are on top of the existing list & power rules. Too bad if you have a F5a mighty boy, it craps itself, can't be rebuilt so you get a F8b cause it's a drop in replacement, rebuild it & drop it in. Your not getting enough of a power or size upgrade too be dangerous, but you technically can't drive it. Even tho under the old law of power to weight it's way under.
I'd hate to be a p plater right now.
In regards to the motor bikes, they have a restricted list now, and you can ride some bikes up to what is it, 400cc or so depending on it's power output, but some 250cc bikes are restricted, like the KR 250, tandem twin 2 stroke, one hellova fast bike, especially for a 250, i've ridden one.

Cheers
ToranaGuy
It's update time MB Parts list! send part info to toranaguy74@optusnet.com.au|