New F8b carby's

Need to offload some Suzuki parts? Do it here.
Post Reply
User avatar
cam
Posts: 260
Joined: Mon Jul 23, 2007 10:08 pm
Location: Darwin, Northern Territory

Hi guys
Got sick of trying to get my carby back together after an attempted DIY rebuild or 2.
I ordered a box of 6 from china. They just arrived. Im keeping 2, so have 4 for sale.

I haven't started my mb with the new carby yet as the motor and gearbox are out, but all fits up perfect.
Will also include a carburettor base gasket from suzistore (quality GSK) and a set of 4 slightly longer manifold studs which you may or may not use. The base of the carby is approx 28mm thick.
My manifold studs were too short, but I bought the car with a daihatsu turbo carby installed, so not sure what the standard stud length is.

anyways here are some pics

Selling them for $150 each plus post.
Im a fair bloke, If your not happy with the carbs, you can post it and studs back for a refund and keep the gasket. (sorry cant refund return shipping costs)

PM me if your keen
bank deposit or PAYPAL
2013-02-23_21-05-57_359.jpg
2013-02-23_21-08-03_944.jpg
2013-02-15_21-00-39_511.jpg
2013-02-15_21-00-46_499.jpg
2013-02-15_21-01-20_470.jpg
2013-02-15_21-01-08_497.jpg
2013-02-15_21-00-56_580.jpg
Top
hxpano308
Posts: 14
Joined: Sun May 01, 2011 1:52 am
Location: Adelaide, SA

Spewing! I just paid $270 to have mine rebuilt last week.
Top
User avatar
cam
Posts: 260
Joined: Mon Jul 23, 2007 10:08 pm
Location: Darwin, Northern Territory

Will be going on ebay @$200 end of month
Top
User avatar
tropicboy
Posts: 5
Joined: Tue Apr 16, 2013 1:59 pm
Location: Airlie Beach

Hi. I'll take one.. Tried to PMB but the messages are still sitting in my out box.. Sorry new at this..
Top
Crazee
Posts: 24
Joined: Thu Sep 27, 2012 11:59 pm
Location: South Australia

Well I was toying with the idea of a triple bike carby setup, but I've been driving around for a couple of months using my choke to idle, plus my secondary isnt opening so I think a new stocker is what I really need. I'll send ya a pm
Suzuki F8B Hatch
Goals for the future:
Paint car orange
Get RANGA3 number plates
Over 100kw and awd...
Gotta aim high right?
Top
Adyinoz
Posts: 4
Joined: Sun Jan 20, 2013 8:45 am

Hi there

Similar problem! Can't get pm to send. Please let me know if you still have one for sale.

Cheers
Top
User avatar
Brayden
Posts: 9101
Joined: Sun Apr 11, 2004 3:09 am
Location: Canberra ACT
Contact:
Contact Brayden

Personal Messages will sit in your outbox until they are read by the recipient. This is a slightly confusing quirk of the forum software.
F8B EFI turbo - Three pots and a snail.
Top
Adyinoz
Posts: 4
Joined: Sun Jan 20, 2013 8:45 am

Ah.

Thanks for that! Will await reply.

Cheers
Top
User avatar
cam
Posts: 260
Joined: Mon Jul 23, 2007 10:08 pm
Location: Darwin, Northern Territory

Hi guys
sorry been off the grid for the last few weeks.
Quick unplanned trip to Sri Lanka for a mates wedding.
Back in action now.
Will look through PM's now
Top
User avatar
cam
Posts: 260
Joined: Mon Jul 23, 2007 10:08 pm
Location: Darwin, Northern Territory

Post will be $20 Aus wide with insurance.
Top
User avatar
rf4burns
Posts: 163
Joined: Fri Sep 03, 2010 7:26 pm
Location: Central QLD

As it has been a month since I PM'd you and you have not replied (the PM is in my sent items so you have received it) I am guessing that either you had a massive response and have sold all these to people who PM'd you earlier or you simply have not replied to the PM?. :NFI:
Get with it ,Get over it ,Get on with it .....OR LEAVE
Top
User avatar
cam
Posts: 260
Joined: Mon Jul 23, 2007 10:08 pm
Location: Darwin, Northern Territory

rf4burns,

Your PM had a link to my for sale post and a quote of the for sale post with nothing writen. I guessed it was a mistake. see below.
Delete messageReport private messageQuote messageRe: New F8b carby's
Sent: Mon Apr 22, 2013 6:23 pm
From: rf4burns
To: cam

Subject: New F8b carby's


cam wrote:
Hi guys
Got sick of trying to get my carby back together after an attempted DIY rebuild or 2.
I ordered a box of 6 from china. They just arrived. Im keeping 2, so have 4 for sale.

I haven't started my mb with the new carby yet as the motor and gearbox are out, but all fits up perfect.
Will also include a carburettor base gasket from suzistore (quality GSK) and a set of 4 slightly longer manifold studs which you may or may not use. The base of the carby is approx 28mm thick.
My manifold studs were too short, but I bought the car with a daihatsu turbo carby installed, so not sure what the standard stud length is.

Yup I'll take one .Will need postage to QLD 4680 .PM me with cost including postage and I will do direct deposit. Stu

anyways here are some pics

Selling them for $150 each plus post.
Im a fair bloke, If your not happy with the carbs, you can post it and studs back for a refund and keep the gasket. (sorry cant refund return shipping costs)

PM me if your keen
bank deposit or PAYPAL

2013-02-23_21-05-57_359.jpg2013-02-23_21-08-03_944.jpg
2013-02-15_21-00-39_511.jpg
2013-02-15_21-00-46_499.jpg
2013-02-15_21-01-20_470.jpg
2013-02-15_21-01-08_497.jpg
2013-02-15_21-00-56_580.jpg
Top
ssc87
Posts: 97
Joined: Wed Aug 12, 2009 11:34 pm
Location: Newy

Re read that. Lol doesnt look like the quote was done properly. He said yup ill take one... about half way through.
Top
User avatar
rf4burns
Posts: 163
Joined: Fri Sep 03, 2010 7:26 pm
Location: Central QLD

Guess you missed the
"Yup I'll take one .Will need postage to QLD 4680 .PM me with cost including postage and I will do direct deposit"

Mucked up quote/reply I guess
Get with it ,Get over it ,Get on with it .....OR LEAVE
Top
User avatar
cam
Posts: 260
Joined: Mon Jul 23, 2007 10:08 pm
Location: Darwin, Northern Territory

Haha thats awesome, didn't see that.
I'll PM you rf4burns. sorry about that.

All have been sold/dibs if Stu is still keen. Will let you know end of this week in any sales fall through.

Thanks guys
Top
Post Reply

Return to “For Sale”