Hey everyone.
Looking for a wiring loom and an ECU for a F6a DOHC 12 Valve engine and would appreciate if anyone has any or
can advise where i can get these either original or after-market.
Regards Alex
F6a DOHC 12 Valve - Loom and ECU
You're likely to find an ECU pretty easily by hunting on Yahoo Auctions, although the wiring loom might be a bit more difficult to source. I don't like your chances of finding either floating around in Aus. If you've got a bit of coin I'd recommend grabbing an Adaptronic or Haltech ECU. Adaptronic have a map preset for an F6A, and both it and the Haltech unit are self learning - very good units.
F8B EFI turbo - Three pots and a snail.
Around $1200-1500 with a universal loom.
F8B EFI turbo - Three pots and a snail.
Well you made that look easy! Where you end up sourcing it from?
F8B EFI turbo - Three pots and a snail.
Unreal - needle in a haystack!
F8B EFI turbo - Three pots and a snail.